• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. The process and properties of metal injection molded heat resistant stainless steel

The process and properties of metal injection molded heat resistant stainless steel

来源 :2013年全国粉末冶金学术会议及海峡两岸粉末冶金技术研讨会 | 被引量 : 0次 | 上传用户：ccache
【摘 要】
：
Metal injection molding (MIM) for HK30 heat resistant stainless steel has been investigated,including the process steps of feedstock preparation,injection molding,debinding and sintering.Mechanical pr
【作 者】
：
W.Wang M.Ouyang D.Ye J.Song F.Peng Y.Yu Z.Zhuang 
【机 构】
：
Xiamen Honglu Tungsten Molybdenum Industry Co.Ltd,361021 Xiamen,China
【出 处】
：
2013年全国粉末冶金学术会议及海峡两岸粉末冶金技术研讨会
【发表日期】
：
2013年9期
【关键词】
：
Metal injection molding (MIM) Heat resistant stainless steel Turbocharger Nozzle 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
　　Metal injection molding (MIM) for HK30 heat resistant stainless steel has been investigated,including the process steps of feedstock preparation,injection molding,debinding and sintering.Mechanical properties of the sintered HK30 stainless steel obtained by various process parameters and the corresponding microstructures have been analyzed.The developed MIM process has been successfully applied to produce the guide vanes for nozzle ring of variable geometry turbochargers (VGT).A method to control the dimensional accuracy of the guide vanes fabricated by MIM has been presented.
其他文献
Pulse electron beam assisted nitriding of TiC-(Ni-Cr) cermet
Numerical estimations of both solubility and subsurface penetration depth of nitrogen into TiC-(Ni-Cr) cermet exposed to an electron beam pulse in a chamber containing nitrogen atmosphere have been pr
会议
metal-ceramics alloysstructural and phase modificationpulse electron beam expo
Preparation and characterization of Quaternary TiZrMnFe gettering compound
The quaternary TixZr1-xMnFe gettering alloys (x =0,0.1,0.2,0.3 and 0.4) were synthesized successfully by arc melting and their phase structure along with microstructures have been investigated by opti
会议
TiZrMnFe alloyArc meltingLaves phaseX-ray diffraction
Study on Reaction Cladding TiCp-(Fe,Cr)7C3 Hadifield Steel Matrix Surface Reinforced Composites Prep
TiCp-(Fe,Cr)7C3 Hadifield Steel Matrix Surface Reinforced Composites were prepared with the mechanism of self-propagating high-temperature synthesis (SHS) by vacuum evaporative pattern casting (V-EPC)
会议
TiCp-(FeCr)7C3Surface Reinforced Compositesself-propagating high-temperature
Microstructure and Mechanical Properties of Al-TiB2 Metal-matrix Composites Prepared under High-inte
Al-TiB2 metal-matrix composites have been fabricated with an exothermic reaction process under high-intensity ultrasound using K2TiF6 and KBF4 salts.In this approach,the microstructure and grain refin
会议
aluminium matrix compositesTiB2high-intensity ultrasound
Molding Modeling and Simulation in Powder Metallurgy
Traditional powder metallurgy is largely dependent on adaptive process control,because many of the important factors responsible for dimensional or quality variations are not measured.The variations i
会议
Die PressingSinteringModelingSimulationDensificationGrain Growth
Comparative Evaluation of Lubricants for PM Structural Steel
In making sintered steel components,lubricant plays one of the most critical roles as it determines apparent density,flow rate,fillability,achievable green density,green strength and surface cleanness
会议
lubricantpowder propertymechanical propertygraphite bonded mix
The Microstructure, Texture and Sputtering Properties of Molybdenum Targets Fabricated by Different
This study prepared Mo sputtering targets with different microstructures and textures through using several metallurgical processes.The effects of microstructure and texture on the sputtering properti
会议
molybdenum sputtering targetmicrostructuredeposition rate
The investigation of Al-based sputtering target by novel powder metallurgy method and its thin film
The Al-Cr-N hard film for tribological application is commonly prepared by sputtering from AlCr alloy target in Ar+N2 mix gas atmosphere.The general method to manufacture Al-rich Al-Cr-N film is co-sp
会议
Hot pressing (HP)Hot isostatic pressing (HIP)Novel powder metallurgy forming (
Innovations-from Catching-up to Leap forward: The Technological Progress of China Cemented Carbide I
The origin and development process of world cemented carbide industry,especially in China,is reviewed.China cemented carbide enterprises have been insisting on making independent innovations to lead t
会议
cemented carbidetechnological progressChina’s rise
Effect of aging treatment on structural and mechanical properties of CuCrZr/AlN nanocomposites
Powder metallurgy method was used to prepare copper alloy nanocomposites (CuCrZr/AlN) with high strength and conductivity.The morphologies and structures of the CuCrZr/AlN nanocomposites were analyzed
会议
Powder metallurgy methodCuCrZr/AlN NanocompositesAging treatmentMechanical pr