Thermal and viscoelastic properties of poly sulfonamide single polymer composites

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户:yongsheng0550
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The PSA single polymer composites were prepared by special hot compaction and their thermal and viscoelastic properties were investigated through TGA and DMA, respectively.The IPDT and Ts were used to characterize the thermal stability, and the TA and Tzg were used to express heat resistant property.
其他文献
  研究了由钛合金和碳纤维增强复合材料混杂铺设而成的Ti-C复合材料混杂层压板(FMLs)的制备及其自由振动问题.使用MSC.PATRAN/NASTRAN有限元分析软件分析计算得到相同尺寸
会议
  利用有限元软件,对比分析了圆形、梯形、三角形、矩形等四种截面形状的复合材料空心列车底架的承载性能。结果 表明,矩形截面为最佳形式。进一步考察了矩形芯管高度、宽度
  航空航天结构对大跨度和超轻型化的理想轻质主承力结构提出了迫切需求,纤维增强复合材料框架结构是其理想材料结构形式,动力频率性能是结构设计过程中关键性能指标。基于结
  In this paper, the equipment compartment were made by nickeled-carbon fiber composites and other materials.It is studied of the equipment compartment shield
会议
  粘弹性材料被广泛应用于振动设备的减振降噪。本文研究建立了基于拓扑优化的粘弹性阻尼复合材料优化设计理论和方法,以获得粘弹性复合材料的最佳阻尼性能。通过逆均匀化方
  均匀化理论具有其严格的数学理论基础,能够准确预测周期性复合材料的等效膨胀系数。然而在数值实现过程中,需要根据微单胞有限元离散所需要的单元类型,进行不同的理论推导和
  本文对两种结构疲劳寿命的评估方法进行对比研究,从理论和分析流程等分别进行对比阐述,对两者的区别与联系进行总结。本文通过有限元实例展示了采用S-N曲线法与断裂力学法
  Aiming at the worldwide challenge of carbon fiber reinforced epoxy resin composite waste recycling and reusing, we have developed a series of degradable epo
会议
  This paper mainly introduces the technology, properties and applications of the adopting pre-braided fiber body enhanced quartz ceramic material preparation
会议
  The poly (vinylidene fluoride)(PVDF) nano fiber film is prepared with the electrostatic spinning technology, using poly(vinylidene fluoride)(PVDF) of 15% ma
会议