Experiment Study of Bubble Rise Drag Coefficient of Liquid Metal in a Strong Magnetic Field

来源 :2nd International Workshop on Heat Transfer Advances for Ene | 被引量 : 0次 | 上传用户:AsiaITt
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  As a important heat transport carrier, liquid metal has been widely concerned in thermonuclear fusion reactor and accelerator driven sub critical system in which the multiphase flow research of liquid metal is very important for the design and safe operation of these devices.
其他文献
Near-critical/supercritical CO2 fluid has been widely used in the field of chemical extraction and synthesis, micro-manufacturing and also heat transfer apparatus, etc.The current study tries to explo
Marangoni condensation attracts much attention in recent years, due to the high heat transfer coefficient and pseudo-dropwise condensation mode which could be maintained for a long time.The present st
A two-dimensional inverse geometry heat conduction problem is solved via conjugate gradient method.The finite volume method is utilized to discretize the governing equations and the domain extension m
Convection scheme plays a key role when using the finite volume method to solve the problems of the fluid flow and heat transfer.In this paper thirteen bounded higher-order convection schemes are used
In this study, the influences of heat flux and mass flux on the two-phase convective boiling heat transfer performance are reported for refrigerants HFO-1234yf and R-134a in a 3.9 mm smooth diameter t
In the waste heat recovery finned tube heat exchangers are widely adopted.In this paper, a three-dimensional simulation was carried out on gas-particle flow across a 4-row circular finned tube bundle
An experimental study on R22, R134a and R410a film condensation on single horizontal tube including a smooth tube and a doubly enhanced tube was conducted at the saturation temperatures of 39 ℃.A Wils
Many high-power electronic devices such as high-power LED devices and aerial devices work intermittently.If some of the heat generated by the chips could be stored in the working time with the thermal
Sublimation is one phase change mechanism that usually happens under low-to-moderate temperatures and at the same time large amounts of latent heat is absorbed or released.Low temperature sublimation
A global model of heat transfer, including melt convection, solid conduction, surface radiation and crystal internal radiation, is established for a sapphire crystal growing system by heat exchanger m