Explicit multi-material topology optimization method for layout design of multi-component systems

来源 :中国计算力学大会2018暨国际华人计算力学大会2018 | 被引量 : 0次 | 上传用户：duancj1972

【摘要】

：

It is accepted that the most of the existing literature on topology optimization are all carried out in an implicit way,which involves a large number of design variables.

【作者】

：

Xuan Wang Ping Hu

【机构】

：

School of Automotive Engineering,State Key Laboratory of Structural Analysis for Industrial Equipmen

【出处】

：

中国计算力学大会2018暨国际华人计算力学大会2018

【发表日期】

：

2018年10期

【关键词】

：

Topology optimization Moving morphable bars Multi-component systems Explicit mod

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　It is accepted that the most of the existing literature on topology optimization are all carried out in an implicit way,which involves a large number of design variables.

其他文献

软质防爆毯防爆性能及机理的数值模拟研究

防爆毯是反恐处突中常用的临时防爆装置，通常由软质复合材料加工而成。为了探索防爆毯在近场爆炸载荷作用下的性能及其吸能机理，采用有限元法，结合纤维复合材料连续介质损伤本构模型，数值模拟研究了软质防爆毯和围栏在爆炸冲击作用下的动态响应，分析了材料的损伤机理和结构的变形失效模式，获得了冲击波的传播与衰减规律，并探讨了泄爆孔的设计对防爆毯防爆性能的影响，可为防爆产品的设计和优化提供参考。

会议

防爆毯纤维复合材料爆炸冲击波数值模拟

设备布局及频带约束对隔振结构拓扑优化结果的影响

在车辆工程、机械工程以及航空航天等领域中，由于外部激励、机构运转及摩擦等因素的存在，系统都会受到振动负面效应的影响，因此，通常会设计各种隔振结构来解决或缓解这类问题。本文以一个简易的隔振结构为对象，分别研究了设备布局和频带约束两类问题对隔振结构拓扑优化结果的影响。

会议

隔振结构设备布局拓扑优化频带约束参数优化

Dynamic response optimization design under harmonic base acceleration excitations of lattice filling

Additive manufacturing techniques can design and fabricate lightweight structures with complex geometries such as lattice structures.

会议

additive manufacturinglattice structuredynamic response

结构动力响应灵敏度求解的径向基函数方法

应用已经提出的径向基函数逼近方法求解结构动力响应，在此基础上提出了一种新的结构动力响应灵敏度计算方法，包括动力位移、速度、加速度和急动度(加速度对时间的导数)的灵敏度，并给出了灵敏度初值的确定方法。通过设计算例，与基于精细积分法和差分法的灵敏度计算结果进行比较，验证了本文方法的可靠性。

会议

径向基函数动力响应灵敏度动力有限元

Wrinkle-free design of thin membrane structures

Thin membrane structures would experience wrinkling due to local buckling deformation when compressive stresses are induced in some regions.Using the stress criterion for membranes in wrinkled and tau

会议

Thin membraneWrinkletopology optimizationPrincipal stress criterion

Applications of Symmetry and Pattern Repetition for Periodic Structures Using Parameterized Level Se

In practical engineering applications,large-scale structures are often disassembled into small-scale components to satisfy transportation,installation,recycling or other practical constraints.Generall

会议

Symmetry and pattern repetitionTopology OptimizationParameterized level set me

Wave fronts steering of elastic SV-waves i 1 n solids via a composite plates based metasurface

会议

Nonlinear dynamic deployment analysis of clustered tensegrity using a multibody approach

Tensegrity structures are composed of struts and cables.The stability is provided by the self-stress in tensioned cables and compressed struts.The clustered tensegrity a special type of tensegrity str

会议

Sliding cableMultibody dynamicsClustered tensegrityDynamic deployment

A Symplectic Pseudospectral Optimal Control Method to Solve Vehicle Trajectory Optimization

In this paper,a symplectic pseudospectral method for nonlinear optimal control problems with inequality constraints is developed and successfully applied to trajectory optimization for vehicle systems

会议

Nonlinear optimal controlVehicle trajectory optimizationSymplectic pseudospect

A symplectic method for DAE optimal control problems

Since many dynamics systems or processes can be described by differential-algebraic equations(DAEs),the DAE optimal control has been widely used in many applications,like the motion planning for robot

会议

optimal controldifferential-algebraic equationssymplecticthe dual variational

Explicit multi-material topology optimization method for layout design of multi-component systems

其他学术论文