某型艇近场噪声和自噪声数值计算

来源 :声学学报 | 被引量 : 0次 | 上传用户:out000
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
采用结构有限元软件NASTRAN和声学边界元软件SYSNOISE,对某型艇振动与声学特性数值计算问题进行了研究。通过基于全船三维有限元分析模型的频响分析计算,获得该船结构振动响应特性参数。以振动频响分析计算结果作为声学边界条件,考虑球面点噪声源的影响,建立了全船三维边界元声学分析模型;并采用间接边界元法,对某型艇近场和自噪声声学特性进行了计算。所得计算结果与该船实测数据进行了对比,证明本文计算方法是可行的。 The structural finite element software NASTRAN and acoustic boundary element software SYSNOISE were used to study the numerical calculation of vibration and acoustic characteristics of a type of ship. Through the frequency response analysis and calculation based on the three-dimensional finite element analysis model of the whole ship, the vibration response characteristic parameters of the ship structure are obtained. Taking the analysis of vibration frequency response as the acoustic boundary condition and the influence of the spherical point noise source, the acoustic analysis model of three-dimensional boundary element is established, and the acoustic properties of the near-field and self-noise of a type of ship are simulated by indirect boundary element method Calculated. The calculated results are compared with the measured data of the ship to prove that the calculation method is feasible.
其他文献
本文基于多孔材料Delany-Bazley 经验模型及传递矩阵法,根据飞机环境系统冲压空气转换活门管 路消声器声衬结构、尺寸参数及其内部温度分布特性,将声衬分为若干层,研究了温度梯
会议
顺驰遭到业界领袖和评论人士公开的,一边倒式的质疑和担心,是否意味着中国地产界过早进入了中年心态? Sunco has been open to industry leaders and commentators, one-sid
航空结构设计广泛使用CATIA 软件作为设计工具,而LMS Virtual LAB 和CATIA 紧密集成,为设计员大范围使用LMS Virtual LAB 作为设计分析工具 创造了条件。某机头改进设计以LMS V
会议
本刊讯经国务院同意,建设部、发展改革委、财政部、国土资源部、人民银行、税务总局、银监会等七部门于6月上、中旬对北京、重庆、河北、江苏、安徽、山东、湖北、湖南等八省
[摘要]为研究不同煤体结构煤的吸附性能,采用不同粒径的煤样模拟了不同煤体结构煤,并对其进行了等温吸附实验,实验结果发现,粒径最小的60-80目煤样的吸附量最大,粒径最大的13-25mm煤样的吸附量最小,并且吸附量随着粒径的增大逐渐减小的规律非常明显。构造煤不同温度的吸附实验表明,构造煤的吸附量与温度呈负相关,温度越高,其吸附性能越弱;随着温度的升高,构造煤的吸附量受温度影响逐渐减小。采用低温液氮吸
金保工程是我国劳动保障领域的一场信息革命,各地都在如火如荼地进行着,目前已实现各省联网,全国网络的基础架构正在形成。要保证信息工程安全运行,就需要培养一批计算机网络