Cement Clinker Microscopy as an Aid to Determine Performance Differences in the Presence of Chemical

来源 :The 14th International Congress on the Chemistry of Cement ( | 被引量 : 0次 | 上传用户:conan_1126
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  It has been observed that certain cement clinkers exhibit a better response with chemical additives than other clinkers regardless of the resulting cements other performance criteria, such as early and late age strength, set time and water demand.These chemical cement additives are generally added at the grinding stage to improve grinding or, as in the cases studied here, improve strength development of certain components of the cement (aluminate, ferrite, silicate phases etc.) and accelerate or retard the hydration.
其他文献
The catalytic performance of NO removal was studied over Mn-Ce/TiO2 catalysts prepared by different preparation parameters, such as preparation method, manganese precursor, Mn/(Mn+Ce) molar ratio and
Currently, the dry cement production technology is the main cement production, mainly due to the chy process production not only Gradually realized the "clean production" and greatly save resources, a
Calcium phosphoaluminate solid solution (LHss) was the main phase of phosphoaluminate cement (PALC),which exhibited good strength development.Based on this, a series of new cement minerals, Ba-bearing
The influence of Fe2O3 on the formation and decomposition kinetics of calcium sulphoaluminate formed from tricalcium aluminate and calcium sulfate was investigated in this paper.Rietveld quantitative
In India, Phosphogypsum is currently generated over 7 million tonnes as an industrial waste during phosphoric acid manufacturing in the wet process treatment of natural rock phosphate by sulfuric acid
Calcium silicate is the main mineral of Portland cement clinker, in which low heat consumption and exhaust emissions require low calcium content.Therefore, exploring the presence of low calcium minera
The useful properties of cement arise from the assemblage of solid phases present within the cement clinker.The phase proportions produced from a given feedstock are often predicted using well-establi
Oxide compounds are included in all types of cements which to be most important in practice.That is why a great attention is paid to studying the features determining the availability of binding prope
Structural characteristics of belite incorporating various amount of BaO and their reactivity with water was investigated by means of XRD, FT-IR and calorimetry.The results indicates that the incorpor
The internal standard and G-factor methods were applied to Rietveld X-ray diffraction quantitative analysis of Portland cement using XPert Highscore Plus and GSAS-EXPGUI software.The phase content of