【摘 要】
：
In order to investigate the feasibility and superior of volcanic rocks used as pozzolan in cement-based composite,the volcanic rocks from the east region of Jiangxi Province, China, were collected for
【机 构】
：
School of Civil Engineering, East China Jiaotong University, Nanchang 330013, China
【出 处】
：
The 14th International Congress on the Chemistry of Cement (
论文部分内容阅读
In order to investigate the feasibility and superior of volcanic rocks used as pozzolan in cement-based composite,the volcanic rocks from the east region of Jiangxi Province, China, were collected for this research.They include tuff, lava, perlite, and laval tuff.The analysis result of chemical composition displayed that the volcanic rocks contained high quantity of SiO2+Al2O3 (>77%), especially great amount of SiO2 (>64%), which are far more than the requirements of composition in the relevant standards.XRD results shown that the volcanic rocks were mainly composed of glassy groundmass, quartz, sanidine, and sodium feldspar.The amorphous phase content of volcanic rock could be obtained from XRD data.The volcanic rocks were comprised of amorphous phase no less than 62%.Pozzolanic activity component for pozzolan was calculated by the product of chemical composition (SiO2 + Al2O3) content (%) and amorphous phase content (%).It declares proportion of pozzolanic activity composition to be able to react during the second hydration reaction without the consideration of particle size, and is appraised as the characteristic index of potential pozzolanic activity to indicate internal capacity of pozzolan to react with CH, instead of chemical composition alone.These volcanic rocks possessed pozzolanic activity components no less than half of whole rock composition.
其他文献
Application of mineral additives and superplasticizers promotes the resistance of concrete to aggressive environment.Improvement of production technology of blended cements with mineral additives and
Microstructural characterization of Class A oil well cement slurries was performed through synchrotron x-ray diffraction technique, which allowed for real-time, in-situ measurements of x-ray diffracti
The Mn-Ni/TiO2 catalyst was prepared by co-precipitation method and investigated for the low-temperature selective catalytic reduction (SCR) of NO with NH3.In this work, Mn-Ni/TiO2 catalysts were prep
The influence of heat pre-treated temperature(600℃、 700 ℃、 800℃ and 900 ℃) on washing pre-treated MSWI fly ash(PW-MSWI) cementitious activity was studied by mortar experiment.Concrete experiment was a
In this paper, experimental results on binary systems blending effect of cement mortar with various amounts of additives by cement weight with same fineness value, including precipitation speed of was
The objective of this study was to investigate the early-age (24h) cracking behavior of self-compacting fiber reinforced cementitious composites (SC-FRCC) with five different fiber volume fractions (V
Developing multifunctional cement-based materials has been a long engineering pursuit that holds great promise and impact for altering the building materials landscape.However, despite recent progress
As for modem high performance precast concrete, the use of early strength water-reducers is the main method to improve the early strength, shorten the steam curing time, speed up the turnover rate, re
The stability of fresh cement paste can be described as its ability to remain homogeneous over time.Instability in the form of sedimentation and bleeding occurs for various reasons related to the mate
1H-Time-Domain-NMR is a non-destructive bulk method providing detailed information about the different physical environments of hydrogen during chemical reactions.Low financial impact in maintenance a