【摘 要】
：
In most cases, passing beam is used when this is required because of the current traffic conditions.Due to the necessity of limiting the dazzling effect, the passing beam is divided into two parts: th
【机 构】
：
Motor Transport Institute Fudan University Shanghai
【出 处】
：
第三届中国国际汽车照明论坛(2015)
论文部分内容阅读
In most cases, passing beam is used when this is required because of the current traffic conditions.Due to the necessity of limiting the dazzling effect, the passing beam is divided into two parts: the lower one ("light"), which is to illuminate the road correctly and over as long a distance ahead of the vehicle as possible, and the upper one ("shadow"), which is to inform about the presence of a moving vehicle on the road.The headlamps must be precisely aimed to obtain the maximum range of road illumination with limited dazzle.The minimum requirements for passing beam have been laid down in type-approval and operational regulations Based on the maximum acceptable range of headlamp aiming tolerances as specified in UN ECE Regulation No.48 the illuminated road length ahead of the vehicle may vary from 20 m to 200 m.If the operational tolerances (i.e.those applicable to vehicles during normal operation) are taken as a basis, this variability range may be even wider.On the other hand, the photometric characteristics of the light beam close to the road surface depend on the said requirements, on the photometric characteristics of the headlamps actually installed on the vehicle, and on the actual headlamp aiming and alignment.From the traffic safety point of view, a matter of great significance for a vehicle being in use is the actual distance to which the road is illuminated.This issue is also important in the case of a need for accident reconstruction.The factors that affect the road illumination range, which is critical for the detection of road obstacles, have been analysed herein, with taking into account the measurements and calculations carried out for real headlamps that can be found in vehicles as well as the possible values of the vertical inclination and horizontal deflection of the light beam.Conclusions drawn from an assessment of the current state of laws and technologies have also been presented.
其他文献
Due to the features of energy conservation, long lifetime, durability and high response speed etc., the LED sources have played a more and more important role in daily life in recent years, including
I.INTRODUCTION The luminous intensity distribution of luminaires and headlamps can be measured by means of goniometers beyond the photometric limit distance.Those measurements do not only require long
The Laboratory of Lighting Technology at the TU Darmstadt developed a device for aiming automotive headlamps under field test conditions.in contrast to conventional headlamp adjustment systems, which
LEDs are today a state of the art technology for automotive headlamps.Devices deliver the required 1000 Im for ECE low beams and deliver luminance in the range of 80 Mcd/m2.Novel prototypes of white h
With recent automotive lamps, signal lamps such as daytime running lamps (DRLs) and tail lamps are occupying larger spaces as stylistic elements;while on the other hand, headlamps, stop lamps, rear fo
This electronic document introduces semiconductor laser optical and electrical properties and existing problems with its application in vehicle rear fogl amp as a new light source.
Automotive ambient lighting, also known as surrounding illumination and atmosphere illumination, is a kind of illumination with the function of decoration and build up different atmospheres.In this pa
近年来随着LED光源及前大灯技术的发展,涌现出全LED大灯、激光大灯等,但最引人注目的技术当属自适应远光灯(ADB-Adaptive Driving Beam),也称无眩目远光灯.本文通过比较动态和静态这两种自适应远光灯形式,从而得出静态自适应远光灯在配光等方面较易实现,并在此基础上分析了几种光学分区的方案,并得出一种比较适中的成本方案,为今后中端汽车市场运用自适应远光灯功能提供了一种可能.
In organic light emitting devices (OLED) ultra-thin (thickness < 1μm) organic semiconducting layers emit diffuse, homogeneous and glare-free light.Due to its unique features as large-area light source
This research of the University Darmstadt focuses on the quantification of the abilities of such systems in terms of detection distance and potential glare for other road users.For this purpose, two v