铁电极化原位调控La0.5Ba0.5MnO3薄膜的电磁性能

来源 :中国物理学会2013年秋季学术会议 | 被引量 : 0次 | 上传用户:firemourne
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
其他文献
Multiferroic materials have attracted much attention recently due to their application for memory,sensor,and spintronics devices.[1,2]Among rare multiferroic materials,BiFeO3is the most promising one
随着晶体管缩小到量子尺度,传统半导体器件的继续集成化发展遇到了难以克服的瓶颈。作为解决方案之一,“铁磁电极/铁电势垒/铁磁电极”多铁隧道结由于同时具有可被外场操控的铁磁序和铁电序,能够极大地提高器件的集成度;另外,多铁隧道结还表现出界面磁电耦合效应,能够用于制作电场控制的自旋器件,从而备受国际科研界关注。
High-quality-factor and low temperature coefficient of the resonant frequency Ca0.66Ti0.34La0.3Al0.3O3 ceramics had been prepared by the conventional solid-state reaction method,and their microwave di
RRAM,which depends on the electrically switchable resistance based on ionic motion to store and process information,is regarded as one of the promising candidates for the next-generation memories due
We use a combination of first-principles method and phenomenological theoretical techniques to study the fundamental physics of novel materials and multifunctional materials.We focus on the research o
It is well-known that it has two modifications,a low-temperature phase (β-CuAgSe) and a high temperature phase (α-CuAgSe).Thermoelectric properties of CuAgSe compounds were studied in the temperature
BiFeO3作为唯一的室温多铁性材料体系,近十年来一直是国内外学者研究的热点。不同于第二类多铁性材料(典型的如RMnO3,R为稀土金属离子Tb,Dy等),BiFeO3的铁电性和反铁磁性具有不同的起源,因此这类多铁性材料中的磁电耦合效应相对较弱。
由Terfenol-D与和多层PZT压电振动片黏结在一起组成磁电复合材料,可获得很大的磁电转换系数9.5 V/(cm·Oe)及很高的磁场灵敏度15 nC/Oe,可探测到0.1 mOe的磁场,而且该复合材料中存在很高的逆磁电效应46.5 G/V,这些高性能的实现仅仅是因为使用了多层压电片.这一结果有助于优化设计高性能磁致/压电复合磁电材料.
采用化学溶液沉积法分别在石英玻璃和Pt/Ti/SiO2/Si衬底上制备了铥镱共掺烧绿石钛酸铋钇薄膜,研究了薄膜的物相、形貌、光致发光及介电性能.X射线衍射分析显示,在石英玻璃衬底与Pt衬底上铥镱共掺钛酸铋钇薄膜结晶为纯烧绿石相结构,没有杂相存在.