论文部分内容阅读
为了提高火花源原子发射光谱仪的工作效率,在相同的环境条件和相同的光谱仪状态下,激发相同样品,采用激发次数递增法测试样品的精度数据,通过对比铁基体程序与铝基体程序不同激发次数时光谱仪的精密度的状况,寻找光谱仪的最佳清理时段.
火花源原子发射光谱仪的清理对仪器精密度影响的探讨
【摘 要】
：
为了提高火花源原子发射光谱仪的工作效率,在相同的环境条件和相同的光谱仪状态下,激发相同样品,采用激发次数递增法测试样品的精度数据,通过对比铁基体程序与铝基体程序不同激发次数时光谱仪的精密度的状况,寻找光谱仪的最佳清理时段.
【机 构】
：
钢研纳克检测技术有限公司,北京100081
【出 处】
：
第195场中国工程科技论坛——中国科学仪器设备与试验技术发展高峰论坛、第四届中国能力验证与标准样品论坛暨2014国际冶金
【发表日期】
：
2014年5期
其他文献
PWV is one of the most important atmospheric parameters,which has important reference value for climate research,weather forecast,weather monitoring and so on.Inaddition to high-precision orbit determ
Space passive hydrogen maser has been applied on Chinas BeiDou Navigation Satellite System.Its long-term reliability and lifetime in orbit are significant topics needed to be verified.The repair metho
GNSS multiple antenna attitude measurement possesses three attitude determination methods,direct solution,nonlinear least squares method and linear least squares method.Normal nonlinear least squares
Recently,unmanned aerial vehicles (UAVs) have been widely used in personal entertainment,aerial photography,geographical mapping,and precision agriculture.Accurate position of the UAV is necessary for
This paper investigates and proposes a low-precision Micro Inertial Measurement Unit(MIMU)/Ultra-Wideband(UWB)integrated positioning scheme,which aims at realizing indoor high-precision and high-stabi
Carrier phase cycle slip detection and repair technology is one of the key technology of high precision GNSS positioning.Carrier phase cycle slip cause the discontinuity of carrier phase observations.
Interference measurement Technology is a well-probed space geodetic technique used to determine the Celestial Reference Frame (CRF),the Terrestrial Reference Frame (TRF) and the Earth Orientation Para
With the continuous improvement of the theory of the Ground-based GPS Meteorology and GPS-MR technology,and increases of the global GPS tracking station.
使用火花源原子发射光谱仪测定0.2～1 mm之间的不锈钢薄板中的铬元素含量,常常会因为样品不平整和分析时间过长导致样品含量不准确或被击穿,通过更改分析条件确定分析时间15 s,氩气流量8 L/min,预燃电压0.55 V,通过参阅相关资料确定使用80＃砂纸磨光表面;使用薄片样品专用夹具.
会议
为满足客户对光谱仪器稳定性和准确度的严格要求,提高光谱仪器的性能和指标,对比了国外光谱仪厂家的火花台设计并分析了光谱仪本身光源系统、色散系统的特性.通过对光谱仪火花台的优化设计和改进,改善了透镜前至火花台腔室、光源部分以及火花台至尾气过滤器部分的气路和光路系统,提升了光谱仪的品质,提高了光谱仪数据的精密度、准确度.
会议