Effect of nano compound addition on the properties and microstructure of cement mortar with fine mix

来源 :2016’中国溶胶-凝胶学术研讨会暨国际论坛 | 被引量 : 0次 | 上传用户:Maygzs
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Mixed recycled aggregate is hardly to be used in cement mortar as fine aggregate due to the high water absorption, low mechanical properties and weak interracial transition zone(ITZ) between cement paste and aggregate.The effect and enhancement mechanism of nano compound addition on the properties and microstructure of cement mortar was studied in this paper.Results showed that the compressive and bending strength of cement mortar with 100% fine mixed recycled aggregate increased about 10% at most of the curing ages and the shrinkage of cement mortar decreased from 2.5% at 1 day to 21% at 28 days by nano compound addition.Microstructure analysis such as XRD, SEM and MIP indicated that the hydration rate of cement could be accelerated and the density of cement mortar may well be increased by nano compound addition.
其他文献
  Due to the excellent mechanical and spectrum properties, Co∶MgAl2O4 is an important saturable absorber (SA), which can be applied as a medium for the passi
  气凝胶具有较好的耐高温和热稳定性,但是Al2O3气凝胶在高的烧结温度下,会发生一系列的相变导致体积收缩、比表面积下降,对其高温隔热、力学等性能可能产生重要影响,极端
  Random inorganic networks composed of silicon, boron, nitrogen and carbon represent amorphous SiBNC ceramics with outstanding durability up to 1800℃[1].Var
  Polyaluminocarbosilane (PACS) can be employed as precursor not only for SiC fibers of ultrahigh temperature resistance, but also for SiC ceramic matrix and
  Despite tremendous efforts have been devoted to enhancing thermal stability properties of SiOC ceramics, the shaping process applied at low cost remains a c
  For the first time to our knowledge, Yb3+/Al3+/P5+/F-co-doped silica preforms were fabricated by sol-gel process combined with high temperature melting tech
  Vanadium dioxide (VO2) undergoes a Mott metal-insulator transition (MIT) close to room temperature, and has been suggested as a candidate for use in smart w
  Cellulose nanofibers (CNFs) have often been added into aerogels for improving the mechanical robustness [1].The insolubility of CNFs in solvent, however, is
  Anatase TiO2 plays an important role in the application of gas sensors.Usually, anatase TiO2 is mainly composed by thermodynamically stable {101 } crystal p
  Electrochromic materials are able to change the optical properties persistently and reversibly by an extemal voltage [1].NiO is one of the most well-known e