RESEARCH AND DEVELOPMENT OF HEAVY WALL DNV485FDU PIPELINE PLATE FOR 3500M DEEP WATER PIPE APPLICATIO

来源 :第七届低合金高强度钢国际会议 | 被引量 : 0次 | 上传用户:danielliang
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  In recent years,there has been development of several significant pipeline projects for the transmission of oil and gas from deep water environments.The production of gas transmission pipelines for application demands heavy wall,high strength,good lower temperature toughness and good weldability.To overcome the difficulty of producing consistent mechanical property in heavy wall pipe Shougang Steel Research in cooperation with the Shougang Steel Qinhuangdao China(Shouqin)4.3m heavy wide plate mill research was conducted.
其他文献
Structural steels with yield strength requirements greater or equal to 690 MPa can be produced through controlled recrystallization hot rolling coupled with precipitation strengthening or purposeful h
The demand for more sustainable development promotes the need for components and steel structures with a longer useful life and better performance.Upgrade of wear steel plate used in key industry segm
The dynamic recrystallization behaviors of the microalloyed non-quenching and tempering steels of 38MnVS and C38N2 were studied by the simulation of hot deformation in the Gleeble3800.The stress versu
Hot compression tests were performed on gleeble-3800 thermal simulation machine to study the effect of different deformation parameters on microstructure of non-quenched and tempered steel with ferrit
Strengthen-mechanism and corrosion resistance of niobium addition high strength low alloy weathering H-beams produced by ultra-fast cooling technology,had been investigated in this research.The result
Based on the technological requirements and market demand,Nb micro-alloying D36 grade high strength shipbuilding plate has been successfully developed in HBIS.In this papers,the rational chemical comp
Tensile tests and fracture toughness tests supported by detailed fractographic examination have been carried-out on two sets of C-Mn weld metal samples with identical microstructure but different incl
The corrosion performance of high strength weathering steel with Cu,Cr micro-alloying under as-rolled,annealed,normalized,and TMCP states was studied.Results showed that the microstructures of steels
The influence of nitrogen addition on the microstructure and mechanical properties of vanadium microalloyed steels was studied by thermal simulation and bench scale rolling experiment.The results show
The effect of ultra-fast cooling(UFC)and conventional accelerated cooling(AcC)on the mechanical properties and microstructure of controlled rolled AH32 grade steel plates on industrial scale were comp