Plant Fibers and Wasted Fibers/Epoxy Green Composites

来源 :第七届亚澳复合材料会议 | 被引量 : 0次 | 上传用户:blue_lnan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  In this study, the plant fibers and wasted fibers (pineapple leaf fiber, banana fiber and recycled disposable chopsticks fiber) with an average length from 2.3 to 3.9 mm were chemically modified by 3-aminopropyltriethoxysilane (A1100).Subsequently, this modified fibers (20 wt%) and epoxy resin were mixed and cured to form novel fiber-reinforced green composites.The results showed that the decomposition temperatures of the chemically modified fiber-reinforced composites were obviously higher than those of untreated fiber-reinforced composites.
其他文献
The non-biodegradability of plastics has caused extensive environmental problems associated with their disposal.Among commercially available biodegradable plastics, recent research has focused on the
Manufacturing techniques and bending properties of three-dimensional (3D) natural fiber composites were investigated in current research.Jute fiber yarn was used to weave orthogonal 3-D preforms by a
Cellulose fibres have high modulus that has made them attractive for use in polymer composites, they are derived from renewable resources and they are biodegradable in contrast to the glass and carbon
D-sorbitol/Polyvinyl alcohol (D/PVA) polyblends were obtained by mixing polyvinyl alcohol (various molecular weights) and D-sorbitol in melting process at about 210 ℃.Furthermore, the behaviors and me
The mechanical properties of the sugarcane and polyurethane/epoxy interpenetrating polymer networks (IPNs) composites were investigated in this study.Interpenetrating polymer networks were prepared fr
Biodegradable Poly (latic acid) (PLA)/Poly(butylene succinate)(PBS) polyblend herein were blended by a melt-blending process to develop a biodegradable thermal plastic elastomer.The phase transitions
Polyvinyl alcohol-glycerol (PVA-G) and polyvinyl alcohol-D-sorbitol (PVA-D) polyblends were obtained by blending polyvinyl alcohol with different molecular weights (PVA17 and PVA24) and plasticizers (
In the world, the critical environmental pollution problem is petroleum chemistry waste.In the future tendency, the biodegradable materials is to substitute the traditional materials.Polylactic(PLA) a
Injection molding is one of the most important processing techniques by which blends are fabricated into plastic parts; the morphological anisotropy characteristic of injection-molded blends is primar
The biorenewability of Polylactide (PLA) is highly valued in terms of energy and carbon savings.The biodegradability of PLA, however, has limited its use toward the disposable applications, such as ag