The development of continuous casting technology of electrical steel was analyzed. The technologies and products charact......

High Nb containing TiAl alloy was fabricated in argon atmosphere by reactive hot pressing process. Reaction mechanism wa......

Effects of micro-amount of rare earth Ce on microstructures of Sn-3.0Ag-0.5Cu solder alloy were studied. The results ind......

The normally centered electron beam and non-centered electron beam welding of TiAl to TC4 was investigated in order to a......

The high strain rate superplastic deformation properties and characteristics of a rolled AZ91 magnesium alloy at tempera......

The hot bulk deformation processes (such as extrusion, forging and rolling) are efficient ways to produce fine microstru......

AZ61Mg alloy was multi directionally forged(MDFed) during decreasing temperature condition from 643 K to 483 K at a true......

The first wall(FW) is one of the core components in ITER. As the heat sink material,the CuCrZr alloy shall be properly j......

针对经过90?模具、8道次等通道转角挤压的纯铜,采用电子背散射电子衍射(EBSD)和透射电镜(TEM)分析大范围内加工路径对其显微组织演......

对TC21钛合金进行双重固溶+时效热处理,研究固溶冷却速率、温度对合金显微组织的影响。研究表明,初生α相形貌主要受一次高温固溶......