论文部分内容阅读
原来我对测斜仪的构造原理不懂,至于修理,更是一窍不通.三年前,我们浙江省冶金地质大队-中队在某矿区开动四台钻机,进行铜矿勘探.因为钻探进尺快,钻孔弯曲度要求严格,测斜间距短(每25米测斜一次),所以测斜任务很重.当时全队有三台JXY-2型测斜仪,在正常情况下,还可勉强应付使用.但是,仪器一旦发生故障,就需送外单位修理,而修理一台仪器一般需要三个月,严重地影响了测斜任务的完成,致使一些钻孔因多点未测斜不得不放慢进尺,甚至有的钻孔几乎到了停钻待测的地步.这种情况,我看在眼里,急在心
Three years ago, we Zhejiang Metallurgical Geological Brigade - Squadron in a mining area to start four rigs for copper exploration.Because drilling fast, drilling Hole curvature is demanding, short interval between measurements (measured obliquely every 25 meters), so the task of measuring inclinometer is very heavy.At that time the team has three JXY-2 inclinometer, under normal circumstances, can barely cope with the use. However, once the instrument fails, it needs to be repaired by the external unit, and repairing an instrument usually takes about three months, which seriously affects the completion of the inclinometer mission and causes some drills to slow down due to the multi-point incongruent , And even some drilling almost stopped drilling to be measured.This situation, I see in the eyes, anxious heart