Analysis of Incomplete Data of Accelerated Life Testing with Competing Failure Modes

• 作 者: TAN Yuanyuan ZHANG Chunhua CHE
• 机 构: College of Mechatronics Engineering and Automation
• 出 处: 中国机械工程学报
• 发表日期: 2004年期
• 关键词: accelerated life testing competing failure modes expectation maximum algorithm i
• 基金项目: Sustentation Program of National Ministries and Commissions of China

Data obtained from accelerated life testing (ALT) when there are two or more failure modes, which is commonly referred to as competing failure modes, are often incomplete. The incompleteness is mainly due to censoring, as well as masking which might be the case that the failure time is observed, but its corresponding failure mode is not identified. Because the identification of the failure mode may be expensive, or very difficult to investigate due to lack of appropriate diagnostics. A method is proposed for analyzing incomplete data of constant stress ALT with competing failure modes. It is assumed that failure modes have s-independent latent lifetimes and the log lifetime of each failure mode can be written as a linear function of stress. The parameters of the model are estimated by using the expectation maximum (EM) algorithm with incomplete data. Simulation studies are performed to check model validity and investigate the properties of estimates. For further validation, the method is also illustrated by an example, which shows the process of analyze incomplete data from ALT of some insulation system. Because of considering the incompleteness of data in modeling and making use of the EM algorithm in estimating, the method becomes more flexible in ALT analysis.