【摘 要】
：
According to the rock burst features occurred in the coal mass of roadway rib in one mine, the mechanics model of coal mass and roof structure system along the edge of goaf was founded to analyze the stress of roof rock layer, so the subside curve of roof
【机 构】
：
College of Resource and Environment Engineering, Liaoning Technical University, Fuxin 123000, China;
论文部分内容阅读
According to the rock burst features occurred in the coal mass of roadway rib in one mine, the mechanics model of coal mass and roof structure system along the edge of goaf was founded to analyze the stress of roof rock layer, so the subside curve of roof rock layer was deduced. Furthermore, the stability of coal and rock system were analyzed, the critical load and critical resistance zone were used to judge the danger degree of rock burst occurrence. The influence of coal mass strength, brittleness degree, coal seam thickness, roof thickness, suspending length, equivalent shear module on the critical load,critical resistance zone was confirmed. So the rock burst occurrence conditions of coal mass in roadway rib mainly depend on mining depth, coal seam thickness and hard roof and floor, which are decided by the above studies, and successfully applied in prediction and prevention of rock burst in this mine.
其他文献
Based on the traditional optimization methods about the pressure control spring of the relief valve and combined with the advantages of neural network, this paper put forward the optimization method with many parameters and a lot of constraints based on n
Taking the practical reinforced engineering of a reinforced soil retaining wall as an example, which located in Shandong Province and set on 104 national highway, the stress-spread behaviors of the anchor bars in the preforced proceeding were tested. Acco
Work face 3312 of coal mining in a colliery was taken as an example in whichmethane data in a series of locations was analyzed. For the purpose of data analysis,work face 3312 was divided into sections with 20 powered supports and some measur-ing-points i
Air leakage may significantly affect the effectiveness of mine ventilation by in-creasing the cost of ventilation and arousing problems for ventilation management. Fur-thermore, air leakage may accelerate the process of coal spontaneous combustion andcaus
The methane drainage can not only make coal seams deformation, but also effect its stress distribution. Based on lab experiment on methane drainage with a cubic coal sample of 500 mm×500 mm×500 mm, mutative law of coal of pore pressure (p) and effective s
In order to improve vibration mills grinding effect and increase productive efficiency, prime factors of vibration mills were gained much attention. The purpose of this study is to reveal product size distribution and grinding dynamics of vibration mills
The number of safety input directly determines the level of safety, and there exists dialectical and unified relations between safety input and accidents. Based on the field investigation and reliable data, this paper deeply studied the dialectical relati
The intensity of heat output of coal, the rate of oxygen consumption and the influence function of coal size are tested by the big coal spontaneous combustion experiment unit. The independence of the coefficient of heat convection is studied. And based on
By analyzing the problems which exist currently in the accident hidden dangers management of the coal mine, this paper proposed a new kind of management method-“simulating the market”, in which an operation pattern of simulating the market to transact hid
The field trail used a mixture of steam and air with various levels of oxygen en-richment. Steady conditions were achieved in the field trail which produced high qualityhydrogen-enriched syngas. To understand and optimize the UCG process, a simplifiedheat