论文部分内容阅读
In this work,a kind of new vitrified bond based on Li_2O-Al_2O_3-SiO_2 glass ceramics was used to bond the diamond grains,which is made into grinding wheel and the cylindrical grinding process of polycrystalline diamond compacts(PDCs)by using the new vitrified bond diamond grinding wheel was discussed.Several factors which influence the properties of grinding wheel such as amount of vitrified bond and the kinds and amount of stuff in grinding wheel were also investigated.It was found that the new vitrified bond can firmly combine diamond grains,when there are only diamonds and vitrified bond in the structure of grinding wheel, the longevity of the grinding wheel is about 2.5-3 times as that of resin bond grinding wheel for processing PDCs.The grinding size precision of PDCs can be improved from±0.03 mm to±0.01 mm because of larger Young’s modulus of vitrified bond than resin bond.The grinding time of a PDC product can be 1.75-2.0 min from 3.25-3.5 min,so this kind of grinding wheel can save much time for processing PDCs.Also,there is hardly noise when using this new vitrified bond diamond grinding wheel to process PDCs.The amount of vitrified bond in grinding wheel influences the longevity of grinding wheel.When the size of diamond grains is 90-107μm,the optimal amount of vitrified bond in grinding wheel is 21%(wt pct).When the amount of vitrified bond exceeds 21%,there are many pores in grinding block,which will decrease the longevity of grinding wheel.The existence of addition stuff such as Al_2O_3 or SiC can reduce the longevity of grinding wheel.
In this work, a kind of new vitrified bond based on Li_2O-Al_2O_3-SiO_2 glass ceramics was used to bond the diamond grains, which is made into grinding wheel and the cylindrical grinding process of polycrystalline diamond compacts (PDCs) by using the new vitrified bond diamond grinding wheel was discussed. Sealing factors which influence the properties of grinding wheel such as amount of vitrified bond and the kinds and amount of stuff in grinding wheel were also investigated. It was found that the new vitrified bond can pull combine diamond grains, when there are only diamonds and vitrified bond in the structure of grinding wheel, the longevity of the grinding wheel is about 2.5-3 times as that of resin bond grinding wheel for processing PDCs.The grinding size precision of PDCs can be improved from ± 0.03 mm to ± 0.01 mm because of larger Young’s modulus of vitrified bond than resin bond. grinding time of a PDC product can be 1.75-2.0 min from 3.25-3.5 min, so this kind of grinding wheel c an save much time for processing PDCs.Also, there is hardly noise when using this new vitrified bond diamond grinding wheel to process PDCs.The amount of vitrified bond in grinding wheel influences the longevity of grinding wheel. WHERE the size of diamond grains is 90 The optimal amount of vitrified bond in grinding wheel is 21% (wt pct) .When the amount of vitrified bond exceeds 21%, there are many pores in grinding block, which will decrease the longevity of grinding wheel. The existence of addition stuff such as Al_2O_3 or SiC can reduce the longevity of grinding wheel.