论文部分内容阅读
为了适应我国目前工业有机废水厌氧处理技术发展的需要,1985年农牧渔业部下达给江苏省沼气研究所研制一种与厌氧试验车相似的组装式厌氧发酵装置。该装置的发酵罐柱体高2.7米,直径1.2米,总容积为3.6立方米。内部置放的填料框架高0.6米,纤维填料上下挂置间距15×15厘米,顶部设三相分离器。锥体部分与水平呢50度夹角。沉淀区内设中心管,管径25厘米,采用多孔管布水经过常州豆制品厂一年半的试运证明效果良好。工艺流程如下: (见流程图) 本装置具有装拆、搬运方便和能组成不
In order to meet the current need of anaerobic treatment of industrial organic wastewater in China, the Ministry of Agriculture, Animal and Fisheries in 1985 issued an assembly-type anaerobic fermentation device similar to the anaerobic test vehicle developed by the Biogas Institute of Jiangsu Province. The device fermenter column 2.7 meters high, a diameter of 1.2 meters, a total volume of 3.6 cubic meters. The interior of the packing frame placed 0.6 meters high, fibrous packing hanging up and down spacing of 15 × 15 cm, the top of the three-phase separator. Cone part and the level of 50 degrees angle. Sedimentation zone center tube, diameter 25 cm, the use of porous tube of cloth water after Changzhou soybean plant a year and a half of trial proved good results. The process is as follows: (see the flow chart) The device has a demolition, handling and can easily