Lumen-apposing metal stent deployment for walled-off necrosis using semi-free hand technique from th

来源 :国际肝胆胰疾病杂志(英文版) | 被引量 : 0次 | 上传用户:huacheng5215
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Lumen-apposing metal stent (LAMS) deployment under en- doscopic ultrasonography (EUS) guidance has been used for walled-off necrosis (WON) [1] . Recently, LAMS with electrocautery enhanced delivery system has been developed. One of the advan- tages of this stent is that the stent can be delivered without any dilation devices. However, to prevent stent migration into the in- testinal lumen, it is important that stent delivery system should be inserted within the WON. When the diameter of WON is not large enough to insert stent delivery system, contralateral wall of WON may be injured. To prevent this adverse event, guidewire insertion may be useful after puncturing. In addition, according to the re- cent reports [2–4] , EUS-guided LAMS placement for WON drainage has been performed. We herein described a case of LAMS deploy- ment from the second part of the duodenum using semi-free hand technique.
其他文献
期刊
期刊
期刊
柴油机缸盖是一种结构复杂的薄壁铸铁件。蠕墨铸铁因其具有良好的热导性和高温强度,能够满足高功率密度柴油机缸盖的设计要求,在科学研究和工程制造方面受到广泛关注。在使役过
铝合金性能优异,是应用广泛的结构材料。在电化学环境中铝合金可能受到腐蚀,而腐蚀往往从金属间化合物微粒、某添加元素富集或贫化区等特殊区域开始。本文主要关注在这些特殊区
Background: Transarterial chemoembolization (TACE) and percutaneous microwave coagulation therapy (PMCT) are commonly used to treat intrahepatic recurrent liver
传动轴铝合金管材承受高功率、高扭矩、高转速,其残余应力越小越有利。管材在成品制备过程需要进行淬火和冷变形,每个过程都对残余应力产生强烈影响。本文通过试验、有限元计算
家门口附近开了一家理发店,刚好头发长了,要修一下,便去了。给我剪发的师傅是个小胖子,一张脸一直带着笑眯眯的表情。听了我的要求后,先是认真地看了看我的脸形,又检查了一下
要想了解王利芬,并不难。2009年9月,王利芬辞去央视公职而正式创业,鉴于她的名人效应,媒体对于她的创业之旅的关注甚至胜过了李开复从谷歌辞职创业的举动。试错:“两周后结束
醇的选择性氧化过程对于制备相应的醛或者酮化合物具有非常重要的基础研究意义和工业价值。生物乙醇的合成技术越来越成熟,其生产成本也越来越低。除了作为混合燃料以外,乙醇还