轴类夹紧要素参考图

• 作 者: 史瑞法
• 机 构: 上海工农动力机厂,
• 出 处: 机械工人.冷加工
• 发表日期: 1985年07期
• 关键词: 参考图 轴类 夹头 平面组合 旋出 止动 子可

在解决生产中的技术问题时,为更好采用先进技术和提高效率,便于思索,我结合工作实践和有关资料,提供下列结构供大家参考。图1:在任意位置对轴快速夹紧、松开、以及拆装。注意:将轴拆下时,须防止夹紧块转动。图2:在任意位置对轴作快速夹紧、松开、以及拆装。图3:在任意位置对轴作快速夹紧、松开,以及拆装。注意:把轴拆开时,须防止夹紧块转动。图4:在任意位置对轴作快速夹紧,不包括轴的拆却。

To solve the technical problems in production, in order to better adopt advanced technologies and improve efficiency, and to be easy to think, I have provided the following structure for your reference in the light of work practices and relevant information. Figure 1: Clamp, release, and disassemble the shaft at any position. Note: When removing the shaft, prevent the clamping block from rotating. Figure 2: Clamp, release, and disassemble the shaft in any position. Figure 3: Clamp, release, and disassemble the shaft in any position. CAUTION: When disassembling the shaft, prevent the clamp block from rotating. Fig. 4: Quick clamping of the shaft at any position, excluding shaft removal.