论文部分内容阅读
油库渗漏无损定位监测是该领域中尚未解决的难题。由于大型油库通常用成百上千个油罐联结起存油。油罐由油管相互联结埋于地下,与油罐油管相接触的是一沙层。沙层(?)为上 天长日久贮油罐或油管总会发生漏油现象。(?)方位通常多发生在接缝处。有时渗油、有时小漏、也可能中漏或大漏。由于油库油面面积太大,因此用油面液位检测法通常很难发现油库是否漏油。有时漏油随地下水流失,严重地污染水源。有时可能造成火灾,引起人身伤亡和重大经济损失。 本文首次报道刊用单片机控制的油库漏油监测系统,利用系统本身的多路漏油检测探头可在油库中的汽油、柴油或煤油发生漏油后的20min到1.5h内检测出来,并报警指示出油库漏油的方位,以便及时维修治理。
Non-destructive location monitoring of oil depot leakage is an unsolved problem in this field. Large oil depots often use up to hundreds of tanks to hold oil. Oil tank connected to the ground by the tubing buried in contact with the tank tubing is a sand layer. The sand layer (?) Is an oil spill that always occurs in storage tanks or tubing. (?) Orientation usually occurs at the seams. Oil leakage sometimes, sometimes small leaks, may also leak or leak. Due to the large oil surface area, it is usually difficult to find out whether the oil depot is leaking with the oil level detection method. Sometimes oil spills with the loss of groundwater, seriously pollute the water. Occasionally, a fire may be caused, causing personal injury and death and significant financial loss. This article reports for the first time the use of SCM oil spill monitoring system, the use of the system’s own multi-channel oil spill detection probe in the depot of gasoline, diesel or kerosene after oil spills within 20min to 1.5h detected and alarm indicator Oil tanker oil location, so that timely maintenance and management.