橡皮切割冲孔机

• 机 构: 上海市工业设备安装公司,
• 出 处: 建筑施工
• 发表日期: 1980年01期
• 关键词: 冲孔 狭长条 卷筒 橡胶垫板 冲床 刀子 手工操作 工业设备安装 专用设备 切口

在行车轨道安装中,需要大量橡胶垫板,过去手工操作,用刀子割,要将整块1000×3000毫米的卷筒橡皮割成200×200毫米这样小块或150毫米宽的狭长条,劳动强湿高,功效低,有的规格需要冲孔,还得占用冲床,与其它工种争设备。我公司一队革新制造了橡皮切割冲孔机,整块卷筒橡皮装上机后,二分钟就能切割成需要的狭长条,效率比手工提高15～

In the installation of traffic lanes, a large number of rubber pads are needed. In the past, manual operation was used to cut the entire 1000×3000 mm reel into 200×200 mm pieces or 150 mm wide strips. High humidity, low efficiency, some specifications need to punch, have to occupy the punch, and other types of work equipment. Our company’s team has created a rubber-cutting punching machine. After the entire roll of rubber is loaded on the machine, it can be cut into required narrow strips in two minutes, and the efficiency is improved by 15~.