论文部分内容阅读
这里介绍一种从市场上花几分钱就能买到的圆珠笔芯稍加工就可以代替4元钱一支的进口笔尖的方法. 先将圆珠笔芯上的铜头与塑料管分离,用酒精将油墨洗净后重新安好,将塑料管剪断,使其与打印笔等长,再用塑料胶带把笔身缠几圈,使其粗细同打印笔相当,最好将胶带分成两股,中间留一段约两毫米,以便观察墨水有无,然后用注射器将墨水从尾部注入笔腔,后面的口子不用堵.这样一支简易的打印笔就可以用了.
Here to introduce a penny from the market can buy a ball pen core can be a little processing can replace 4 yuan a method of importing nibs first ballpoint pen on the copper head and plastic pipe separation, Wash the ink and then re-set, the plastic pipe cut, so that with the printing pen length, and then wrapped around the pen body with plastic tape to make it the same thickness with the printing pen, the best tape will be divided into two shares, the middle A section of about two millimeters, in order to observe the presence of ink, and then use a syringe to inject ink from the tail into the pen chamber, the back of the hole do not plug. Such a simple pen can be used.