论文部分内容阅读
摄像机在使用过程中常发生各种各样的故障,据笔者修理记录统计,由以下原因造成的摄像机故障占很大比例,现举数例供读者参考。一、缺油一台NV—M7型摄像机装入盒带,按重放(PLAY)键,机器保护。拆开机壳,观察发现摄像机压带轮没有到位,用手推动压带轮,觉得阻力较大,将压带轮推到位后,盒带能运转,且机器不再保护。由此看来,压带轮不到位的
Camera in the course of the use of a variety of failures often occur, according to the author repair records statistics, caused by the following causes of a large percentage of camera failure, to give you a few examples for readers reference. First, the lack of oil One NV-M7-type camera into the cartridge, press the playback (PLAY) button, the machine protection. Open the case, observed that the camera pressure pulley is not in place, pushing the pressure pulley by hand, that resistance is greater, push the pressure pulley in place, the cassette can run, and the machine is no longer protected. Seen in this light pressure pulley is not in place