论文部分内容阅读
我厂进口日本的BX—110P加工中心,电气及伺服部分都是FUNAC公司产品。数控系统是FUNAC的11系统,在使用过程中出现过一些故障,现将处理过程介绍如下,以供参考。 例1,机床在10G状态下加工工件时,抓刀臂将刀具从主刀库中取出送入送刀盒中,不能缩爪,但又不报警,此故障不常有,但有时一出现,令操作者不知所措。将机床切换到ATC状态,手动操
I plant in Japan BX-110P processing center, electrical and servo parts are FUNAC company’s products. CNC system is FUNAC 11 system, there have been some failures in the course of use, the process is introduced below, for reference. Example 1, the machine tool in the 10G state processing of the workpiece, the grab arm will remove the tool from the main magazine into the delivery box, can not shrink the claw, but not alarm, the fault is uncommon, but sometimes appear, so that when Operators know what to do. Switch the machine to ATC state, manual operation