论文部分内容阅读
A comprehensive understanding of the sediment behavior at the entrance of diversion channels requires complete knowledge of three-dimensional (3D) flow behavior around such structures. Dikes and submerged vanes are typical structures used to control sediment entrain-ment in the diversion channel. In this study, a 3D computational fluid dynamic (CFD) code was calibrated with experimental data and used to evaluate flow patts, the diversion ratio of discharge, the strength of secondary flow, and dimensions of the vortex inside the channel in various dike and submerged vane installation scenarios. Results show that the diversion ratio of discharge in the diversion channel is dependent on the width of the flow separation plate in the main channel. A dike perpendicular to the flow with a narrowing ratio of 0.20 doubles the ratio of diverted discharge in addition to reducing suspended sediment input to the basin, compared with a no-dike situation, by creating the outer arch conditions. A further increase in the narrowing ratio decreases the diverted discharge. In addition, increasing the longitudinal distance between consecutive vanes (Ls) increases the velocity gradient between the vanes and leads to a more severe erosion of the bed, near the vanes.