论文部分内容阅读
Microstructures of casting samples of Fe–9%Cr steel and samples subjected to different heat treatments were investigated to determine their formation and evolution mechanism. The results show that there is no macroscopic segregation in the casting Fe–9%Cr steel. During cooling from solidification temperature to room temperature, d-ferrite→austenite transformation is obviously influenced by cooling rate, while subsequent transformation of austenite does not obviously depend on the cooling rate. In the casting samples, a great number of precipitates distribute inside martensitic laths while there are almost no precipitates inside d-ferrite. When the casting samples were reheated to and isothermally held at 800 °C, the original precipitates and the lath boundaries disappeared gradually. Meanwhile, new precipitates nucleate and grow at the prior lath boundaries.
Microstructures of casting samples of Fe-9% Cr steel and samples subjected to different heat treatments were investigated to determine their formation and evolution mechanism. The results show that there is no macroscopic segregation in the casting Fe-9% Cr steel. During cooling from solidification temperature to room temperature, d-ferrite → austenite transformation is obviously influenced by cooling rate, while subsequent transformation of austenite does not obviously depend on the cooling rate. In the casting samples, a great number of precipitates distribute inside martensitic laths while there are almost no precipitates inside d-ferrite. When the casting samples were reheated to and isothermally held at 800 ° C, the original precipitates and the lath boundaries disappeared gradually. Meanwhile, new precipitates nucleate and grow at the prior lath boundaries.