都是供电线路惹的祸

• 作 者: 李圣良
• 出 处: 电脑爱好者
• 发表日期: 2000年20期
• 关键词: 电源功率 供电线 品牌机 数据线 房内 输出电压 输人电压 带负载能力 不工作状态 后机

今年夏天,机房内的机器有几台出现故障,表现为开机后机器自检完立即反复重启动。机器配置为品牌机,P200,32M内存,4.3GB硬盘。考虑到光驱为后来所配,估计电源功率不够,于是换上一个完好电源,开机后能正常工作,但过了几天又出现了同样故障,且表现的时好时坏。一个偶然的机会,发现这些机器当弹出光驱时机器能正常工作,只要推入光驱机器就会

This summer, there are several machines in the machine room failure, the performance of the machine after the self-test boot immediately repeated restart. Machine configuration for the brand machine, P200, 32M memory, 4.3GB hard drive. Taking into account the CD-ROM for the later allocation, the estimated power supply is not enough, so put on a good power supply, boot to work properly, but after a few days there have been the same failure, and the performance of good times and bad. By chance, we found that these machines can work normally when the optical drive is ejected, as long as they are pushed into the optical drive.