The silver in some silver-manganese ore with a grade of 3.15 × 10-4 was concentrated by a combined beneficiation technique including magnetic separation, flota
The effect of gas pressures on the mean pore size, the porosity and the pore size distribution of lotus-type porous magnesium fabricated with Gasar process were
Microbridge testing was used to measure the Youngs modulus and residual stress of metallic films. Samples of freestanding NiFe film microbridge were fabricated
The effects of the process parameters of TIG (tungsten inset gas)-flux welding on the welds morphology,angular distortion, ferrite content and hot cracking in a
Magnetron-sputter deposition was used to produce Ti-48Al-8Cr-2Ag coating on a cast alloy substrate with the same composition. Hot corrosion was carried out in m
Eighteen reinforced concrete beams, including 16 beams strengthened with CFRP laminate at different levels of preload and 2 control beams, were tested to invest
High resolution magic angle spinning (MAS)-1 H nuclear magnetic resonance (NMR) spectroscopic-based metabonomic approach was applied to the investigation on the