论文部分内容阅读
The cyclic symmetry and local fine-mesh technology were adopted in the establishment of numerical simulation model for inner gear spin-forming. And the processing experiment was proceeded to verify the reliability of the established model. The simulation result indicates that besides radial and axial flows, there also exists rather large tangential flow, which results in an increase of forming force in tangential direction. Furthermore, the un-uniform deformation of metal during spin-forming would cause forming defects, such as underfill in tooth fillet region and indentation on the outside spun part.
The cyclic symmetry and local fine-mesh technology were adopted in the establishment of numerical simulation model for inner gear spin-forming. And the processing experiment was proceeded to verify the reliability of the established model. , there also exists large large tangential direction, which results in an increase of forming tangential direction, which results in an increase of forming force in tangential direction, the un-uniform deformation of metal during spin-forming would cause forming defects, such as underfill in tooth fillet region and indentation on the outside spun part.