论文部分内容阅读
In the classical process for stability studies on the rotor-bearing system with crack faults,the simple discrete model is adopted for research on such problems,which neglect some needful dynamical influence factor,such as the material damping,shearing effect and gyroscopic effects,etc.Therefore,it is necessary to find a precise calculation model for simulation of the rotor-bearing system with cracks faults.In this paper,instead of the traditional simple discrete model,finite element(FE)model is adopted to investigate the motion stability of a nonlinear rotor system with crack fault.According to finite element theory,the FE model of the cracked rotor system is established firstly.It should be pointed out that the element where the crack occurs is modeled by a particular crack element and the supports at both ends are simulated by two nonlinear loads.Then,based on dimensionless and dimensionality reduction,the Newmark-βmethod and the shooting method are employed to study the effect of eccentricity and the depth of crack on instability speed and bifurcation feature.Furthermore,the simulation results are verified by some corresponding experiments.The simulation and experimental results show that instability speed does not change monotonically,but decreases firstly and then increases when the amount of eccentricity increases.Moreover,as the type of instability changes,the instability speed jumps concomitantly.Additionally,the presence of crack fault can disturb the oil whirl,as a result,instability speed tends to increase slightly,but it does not affect the type of instability and jumping phenomenon.This research presents an effective and convenient method which uses the finite element method(FEM)to research the motion stability of the nonlinear rotor-bearing system with cracked faults and other nonlinear force,and the proposed method can provide a theoretical reference for stability analysis and vibration control in more complex relevant rotor-bearing system.
In the classical process for stability studies on the rotor-bearing system with crack faults, the simple discrete model is adopted for research on such problems, which neglect some needful dynamical influence factor, such as the material damping, shearing effect and gyroscopic effects, etc .Therefore, it is necessary to find a precise calculation model for simulation of the rotor-bearing system with cracks faults.In this paper, instead of the traditional simple discrete model, finite element (FE) model is adopted to investigate the motion stability of a nonlinear rotor system with crack fault. According to finite element theory, the FE model of the cracked rotor system is established first. It should be pointed out that the element where the crack occurs is modeled by a particular crack element and the supports at both ends are simulated by two nonlinear loads. Then, based on dimensionless and dimensionality reduction, the Newmark-βmethod and the shooting method are employed to study the effect of e ccentricity and the depth of crack on instability speed and bifurcation feature. Future proofs, the simulation results are verified by corresponding numbers. The simulation and experimental results show that instability speed does not change monotonically, but reduced first and then increases when the amount of eccentricity increases.Moreover, as the type of instability changes, the instability speed jumps concomitantly. Additionally, the presence of crack fault can disturb the oil whirl, as a result, instability speed tends to increase slightly, but it it not not affect the type of instability and jumping phenomenon. This research presents an effective and convenient method which uses the finite element method (FEM) to research the motion stability of the nonlinear rotor-bearing system with cracked faults and other nonlinear force, and the proposed method can provide a theoretical reference for stability analysis and vibration control in more complex relevant rotor-bearing system.