【摘 要】
：
7xxx welding wire was self-made by spray forming ingots drawn to series welding wires products, and then TIG butt welding test is used for 5 mm thick 7075 high-strength aluminium alloy. After welding, the stress relief+solid-solution aging heat treatment
论文部分内容阅读
7xxx welding wire was self-made by spray forming ingots drawn to series welding wires products, and then TIG butt welding test is used for 5 mm thick 7075 high-strength aluminium alloy. After welding, the stress relief+solid-solution aging heat treatment (T6) were performed to joints, and the mechanical properties and microstructure of the joints before and after heat treatment were comparative analyzed. The results show that the properties of the heat-affected zone (HAZ) of the joint before heat treatment decreas, and the joint is softened. The welded joints tensile strength is 271.8MPa, the elongation is 5.6％, and the average hardness of the weld is 118. 4HV. The second phase particles such as η(MgZn2), S(Al2CuMg), Al13Fe4 are distributed in a network layer, with no apparent element segregation. After heat treatment, the structure of each area of the joint is coarsened, and a small amount of Fe-containing impurity phases are distributed. Theηand S phases are dissolved in the matrix. The hardness of each area of the joint is increased to 155 HV, and the softening zone is disap-peared, this leads the joint elongation close to 16.9％. The tensile strength is increased to 511.8 MPa, reaching 94％of the base metal tensile strength.
其他文献
认知安全风险是构建基于船岸协同的船舶智能航行系统的前提条件.基于船岸协同关系研究结论,根据船舶智能航行系统技术特点和“智飞”号智能航行测试结果,研究构建了船舶智能航行风险演化概念模型及其数学表达模型,分析了无人化趋向、基于航行场景和连锁效应下的风险演化一般规律及其特征,为船舶智能航行风险认知和管控、政府治理以及基于船岸协同的船舶智能航行系统的构建提供参考.
基于长江经济带2010～2018年相关数据,运用GeoDa软件与Stata软件进行分析,探究水运对经济发展的影响.利用熵值法确权后得出水运发展指数,将其作为解释变量进行计算空间效应.研究结果表明:长江经济带地区经济发展呈现显著的空间正相关,90.9％的地区呈现高高聚集或低低聚集;水运对地区经济增长存在正的空间效应,对于长江经济带内部某一地区而言,长江经济带整个区域的水运发展指数每增加1％,该地区的人均GDP增加0.577％;某一地区的经济发展不仅受自身水运发展水平的影响,也受长江经济带内部其他地区的影响,
为了厘清船舶智能航行状态下的船岸、船船协同关系,梳理了船舶航行的23项活动、行为及其相关方.结合实例分析了船舶智能航行各种驾驶模式及其转换与发展趋势,简要介绍了遥控驾驶和自主驾驶模式下的船船协同、船舶与岸端机构的信息交互和协同,为提高智能航行信息交互效率,认识智能航行的船船、船岸协同关系和构建基于船岸协同的智能航行与控制系统提供技术理论支撑.
2021年12月25日,2022年全国海事工作会议在京召开.会议采用电视电话形式召开.交通运输部党组成员、副部长赵冲久出席会议并讲话,部海事局党组书记、局长曹德胜作工作报告.
To investigate the influence of temperature field of friction stir welding (FSW) 2219 aluminum alloy thick plate, and to achieve effective prediction of temperature field, the authors establish a three-dimensional numerical simulation model of FSW 18 mm t
The effect of the shielding gas composition and the cathode processing history on the weld formation quality during welding with a non-consumable electrode at high current was studied. The major reasons for pores,“waists”and undercuts formation during wel
Owingto diamond excellent physical and chemical properties, so synthetic diamond abrasives are extensively used in manufac-turing diamond tools are utilized in machining hard and brittle materials. The brazing technology is exploited with strong bonding f
In this paper,the rapid and integrated manufacture method of 3D printing gun drill is put forward. The 3D printing process test of the composites gun drill composed of medium carbon steel drill shank, low alloy steel drill pipe and tungsten cobalt hard al
To evaluate themetallurgical properties of ERNiCrMo-4 and ER304 welding wires in the Hastelloy C276 and 316L stainless steel lap-welded joints, the analyses of microstructure, hardness, element distribution and mechanical properties were conducted. The re
Thermal fatigue performance of copper/stainless steel explosive welding joint was investigated by using a highly effective thermal fatigue test device. The testing device adopted induction coil to heat and carry out two groups of thermal fatigue test at t