论文部分内容阅读
(一) 盘子印花机本机(图1,单色印花机)利用装在弹性支架内的橡皮印头,对平面或拱形物比如平盘式深皿等施以颜料或金水进行装饰(略)。该机安装在备有控制器件的管式机座上,由配有工具夹和上料带的滑板、印模以及供料盘组成。滑板由液压来回驱动,使得刮刀(工具)可以进入或离开印模。未冲印的制品随着印模下的滑板运动,并自动调准位置。当滑板在工位外时,附属于印模的橡皮印头向下冲压,就被上料带施以颜料。当滑板进入工位时,印头再次下冲制品,使之印上颜料。与此同
(A) plate printing machine The machine (Figure 1, monochrome printing machine) using a rubber stamp mounted within a flexible bracket, flat or arched objects such as flat-panel deep dish to paint or gold water decoration ). The machine is mounted on a tubular base with a control device and consists of a slide, impression and feed pan with tool holder and feed belt. The slide is driven back and forth hydraulically, allowing the doctor (tool) to enter or leave the impression. Unprinted products slide along the impression and automatically adjust their position. When the skateboard is outside the work station, the rubber stamp attached to the stamp is pressed downward and is applied with paint. When the skateboard into the station, the Indian head under the red products again, so that the printing of paint. Same with