论文部分内容阅读
The oxidation behavior at 973 1 273 K and the effect of oxidation on the room temperature tribological properties of hot pressed boron carbide ceramic were investigated. Oxidized samples were studied by X ray diffractometer and scanning electron microscopy. It is demonstrated that the oxidation results in the formation of a thin transparent B 2O 3 film, and the oxide film is severely cracked during cooling due to the thermal expansion mismatch between the oxide film and B 4C substrate. B 2O 3 reacts with moisture in air to form boric acid, which is a kind of solid lubricant. The sliding friction factors of oxidized B 4C pair are about 0.05 0.08, compared to 0.25 0.35 of the as received B 4C pair. When the oxidation temperature is up to 1 273 K, severe unstability and increase of friction factor are observed. Visual inspection of the wear track reveals that the lubricant film is broken and some debris particles occur on and around the rubbing surfaces, because the friction interface is rough by the severe etching of grain boundaries.
The oxidation behavior at 973 1 273 K and the effect of oxidation on the room temperature tribological properties of hot pressed boron carbide ceramic were investigated. Oxidized samples were studied by X ray diffractometer and scanning electron microscopy. It is demonstrated that the oxidation results in the formation of a thin transparent B 2O 3 film, and the oxide film is severely cracked during cooling due to the thermal expansion mismatch between the oxide film and the B 4C substrate. B 2O 3 reacts with moisture in air to form boric acid, which is a The sliding friction factors of oxidized B 4C pair are about 0.05 0.08, compared to 0.25 0.35 of the as received B 4C pair. When the oxidation temperature is up to 1 273 K, severe unstability and increase of friction factor are observed. Visual inspection of the wear track reveals that the lubricant film is broken and some debris particles occur on and around the rubbing surfaces, because the fric tion interface is rough by the severe etching of grain boundaries.