RF performance evaluation of p-type NiO-pocket based β-Ga2O3/black phosphorous heterostructure MOSFE

来源 :半导体学报(英文版) | 被引量 : 0次 | 上传用户:leolee4510
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The radio-frequency (RF) performance of the p-type NiO-pocket based β-Ga2O3/black phosphorous heterostructure MOSFET has been evaluated.The key figure of merits (FOMs) for device performance evaluation include the transconductance(gm) gate dependent intrinsic-capacitances (Cgd and Cgs),cutoff frequency (fT),gain bandwidth (GBW) product and output-conductance (gd).Similarly,power-gain (Gp),power added efficiency (PAE),and output power (PouT) are also investigated for large-signal continuous-wave (CW) RF performance evaluation.The motive behind the study is to improve the β-Ga2O3 MOS device performance along with a reduction in power losses and device associated leakages.To show the applicability of the designed device in RF applications,its RF FOMs are analyzed.With the outline characteristics of the ultrathin black phosphorous layer below the β-Ga2O3 channel region,the proposed device results in 1.09 times improvement in fT,with 0.7 times lower Cgs,and 3.27 dB improved GP in comparison to the NiO-GO MOSFET.The results indicate that the designed NiO-GO/BP MOSFET has better RF performance with improved power gain and low leakages.
其他文献
通过介绍CSPB20T防爆柴油机混凝土喷射车的整体结构和臂架结构设计及工作原理,并针对臂架3种极限工况进行有限元分析,对结构薄弱区域进行优化处理,保证了臂架结构安全性和稳
会议
统计分析了54组止裂厚钢板屈服强度Rp0.2、拉抻强度Rm、伸长率A、断面收缩率Z、屈强比Rp0.2/Rm和侧面落锤无塑性转变温度TNDT的相关性规律,结果表明:止裂厚钢板屈强比越低,钢
为实现巷道临时风门的自动化控制与快速拆装,设计了一套双向无压快速拆装自动风门.通过介绍该风门的系统组成和工作原理,分析影响风门快速拆装的主要因素,发现该风门能够有效
会议
High-quality AlN/sapphire templates were fabricated by the combination of sputtering and high-temperature (HT) annealing.The influence of sputtering parameters
It is common to empirically correlate volumetric mass transfer coefficient kLa for predicting gas-liquid mass transfer in industrial applications, and the inves
会议