Preparation of Hydroxyapatite/Polylactide Bicomposites by Absorption Process in Liquid Phase

来源 :武汉理工大学学报英 | 被引量 : 0次 | 上传用户:hong2007quan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as interfusion of chemical impurity substances, nonuniformity dispersal of HA in PLA, low molecular weight of PLA. HA particles were uniformly dispersed in PlA matrix,and shawed well adhesion with PLA matrix. The biocomposites have the higher mechanical properties and suitable decomposable capability.
其他文献
Films were developed from the modified wheat glutens by microbial transglutaminase(MTGase, [E/S]=10u/g,15u/g and 20u/g) in order to improve physical and barrier
Three kinds of titanium surface especially the HA surface are analyzed. Titanium was treated by 3 kinds of methods that were acid & alkali, calcic solution and
Ordered nanostructure arrays of Ni-Al2O3 were synthesized by direct current electro-deposition in anodic alumina membranes (AAM). The investigation with an elec
The characteristics of broken surfaces were researched by a scanning electron microscope (SEM) and a reflection microscope, and the fractal dimensions of broken
Coastal structures may be built on natural sedimentary intermediate grounds, which mainly consist of silty soils and fine sandy soils. In this study, extensive
SmxGdyCe1-x-yO2-δ (x+y=0.2 and x=0, 0.04, 0.08, 0.12, 0.16, 0.2) nanopowders were prepared by a coprecipitation method. The zeta potential and sedimentation vo
Thin film of biodegradable calcium phosphate coated on threaded commercially pure titanium (cp-Ti) dental implants has been investigated as one of alternatives
This study examined the biological response of two porous calcium phosphate ceramics,hydroxyapatite (HA) and hydroxyapaptite/ β-tricalcium phosphate ( HA / β-
There is a great demand for in-situ real-time chemical sensors in the oceanographic research, to measure the chemical components under the deep sea. The ISE (Io
An integrated metallurgical model was developed to predict microstructure evolution and mechanical properties of iow-carbon steel plates produced by TMCP. The m