GO-modified flexible polymer nanocomposites fabricated via 3D stereolithography

来源 :化学科学与工程前沿 | 被引量 : 0次 | 上传用户:qxwww1011
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Graphene oxide (GO) induced enhancement of elastomer properties showed a great deal of potential in recent years,but it is still limited by the barrier of the complicated synthesis processes.Stereolithography (SLA),used in fabrication of thermosets and very recently in flexible polymers with elastomeric properties,presents itself as simple and user-friendly method for integration of GO into elastomers.In this work,it was first time demonstrated that GO loadings can be incorporated into commercial flexible photopolymer resins to successfully fabricate GO/elastomer nanocomposites via readily accessible,consumer-oriented SLA printer.The material properties of the resulting polymer was characterized and tested.The mechanical strength,stiffness,and the elongation of the resulting polymer decreased with the addition of GO.The thermal properties were also adversely affected upon the increase in the GO content based on differential scanning calorimetry and thermogravimetric analysis results.It was proposed that the GO agglomerates within the 3D printed composites,can result in significant change in both mechanical and thermal properties of the resulting nanocomposites.This study demonstrated the possibility for the development of the GO/elastomer nanocomposites after the optimization of the GO/flexible photoreactive resin formulation for SLA with suitable annealing process of the composite in future.
其他文献
电力系统中性点的接地方式是一个非常综合的技术问题,它与电网电压等级、电网结构、绝缘水平、供电可靠性、继电保护、过电压保护、通信干扰(电磁环境)、接地装置及人身安全都
开关磁阻电机(SRM)驱动系统是20世纪80年代出现的一种新型机电一体化的可控调速驱动系统。它是随着微电子技术、控制技术、电力电子技术和现代计算机技术的发展而发展起来的。它具有结构简单、运行可靠、控制灵活及效率高等突出特点,有极其优良的性能和广泛的应用前景。目前已经在多个工业部得到应用,且被国际电动车科技界誉为21世纪适用于电动车辆最有发展潜力的一种电力驱动系统。 由于SRM的特性和控制方式
A form stable NaCl-Al2O3 (50-50 wt-%)composite material for high temperature thermal energy storage was fabricated by cold sintering process,a process recently a
蓝靛果作为一种纯天然、绿色、野生的可食用浆果,具有抗炎、降血压、抗氧化、抗癌等生理活性,是国内外研究的热点。根据自由基损伤原理,具有较强抗氧化能力的物质,也具有潜在的抗癌作用,所以蓝靛果具有成为抗癌药物的巨大前景。本课题以蓝靛果作为研究对象,对其抗氧化物质提取工艺进行优化,并对提取物进行了体外抗氧化试验,分别研究了蓝靛果提取物对DPPH、·OH、O_2~-·的清除作用,及其抗油脂、抗脂质过氧化试验
使用显微镜观察棒状颗粒时,样品不可避免的会出现颗粒交叉、叠加等情况,这是使用图像处理方法测量棒状颗粒急需解决的问题,本文对棒状交叉颗粒的分离算法进行了研究,研究内容
The desulfurization by seawater and mineral carbonation have been paid more and more attention.In this study,the feasibility of magnesia and seawater for the in
药片缺陷检测是药片生产过程中的关键环节,其检测结果的好坏直接影响着药品的质量。常见的人工检测和抽样检测,成本高、效率低、检测的主观和随机性,无法满足现代企业对产品质量
随着谐波问题的日益严重,采用有源电力滤波器补偿谐波是一个重要的发展趋势。模拟控制是有源电力滤波器的传统控制方式,控制的灵活性不高,修改不方便,精度不高。随着目前DSP技术的飞速发展,性价比越来越高,数字化控制有取代传统模拟控制的趋势。因而本文就DSP用于APF的检测和控制进行了研究。 首先,本文对目前应用非常广泛的基于瞬时无功功率理论的谐波检测方法进行了分析和探讨,总结了这种方法目前最新的改
中医独特的诊断方法及治病的疗效是有目共睹的。随着传感器技术和计算机处理技术的发展,人们开始致力于脉诊的客观化研究,希望用现代科学技术的方法和仪器,推进中医脉诊的现代化
为了探讨不同加工方式对皱纹盘鲍消化特性的影响,分析了生鲜、煮制、罐制、干制和冷冻5种加工保藏方式对鲍鱼肌肉蛋白在消化酶作用下的分解情况。重点研究了鲍鱼流通过程中广