论文部分内容阅读
钢筋混凝土蓄水池盛水量较大,水对池壁及池底的压强也较大,同时由于其具有壁薄的特点(一般底板及壁厚均在120mm左右),造成了蓄水池有易渗漏的质量通病。严重的渗漏不仅损失蓄水量,而且严重危害水池及周围建筑物的地基承载力,且渗漏处常处于地面下,难于察找及修补。为预防水池渗漏的产生,我们在施工中总结出一套全面的预防措施,保证从施工方案的选择到完工后检验的全部工序中均采用最佳的抗渗方法。 一、选择好合适的防水混凝土种类 根据不同环境、条件下施工的蓄水池,选择采
The reinforced concrete reservoir holds a large amount of water, and the pressure of the water on the wall of the pool and the bottom of the pool is also large. At the same time, due to its thin wall (generally the base plate and wall thickness are all around 120mm), the reservoir is easy to make. The quality of leakage is common. Severe leakage not only loses water storage capacity, but also seriously damages the foundation bearing capacity of the pool and surrounding buildings, and the leakage site is often under the ground, making it difficult to find and repair. In order to prevent the occurrence of pool leakage, we have concluded a comprehensive set of preventive measures during construction to ensure that the best impervious methods are used in all processes from the selection of the construction plan to the completion of the inspection. First, choose a suitable type of waterproof concrete According to the reservoir under different conditions and conditions, choose mining