Subharmonic and Combination Resonance of Rotating Pre-deformed Blades Subjected to High Gas Pressure

来源 :固体力学学报(英文版) | 被引量 : 0次 | 上传用户:daqizzq
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The present paper deals with the investigation of dynamic responses of a rotating pre-deformed blade in four cases of resonance,including two subharmonic resonances and two combination resonances.The dimensionless gas excitation amplitude is assumed to share the same order with the dimensionless vibration displacement.Four cases of resonance are confirmed by examining the secular terms.The theoretical analysis framework is established for each resonance case based on the method of multiple scales.The original dynamic system is integrated numerically by the Runge-Kutta method.The frequency components and phases obtained from fast Fourier transform of the numerical response are used to verify the theoretical results.For the purpose of contrast,modulation equations are also integrated numerically.In all four resonance cases,the theoretical results agree well with the numerical simulation.Parameter studies are conducted to clarify the effects of system parameters on the perturbation curves.Various results are obtained for the rotating blade.A quasi-saturation phenomenon occurs in both combination resonances of summed type and difference type,and the corresponding limit value of the second-mode response can be reduced by decreasing the external detuning parameter.The quasisaturation phenomenon of rotating blade only appears with high gas pressure.The subharmonic resonance of second mode and the combination resonance of summed type are hard to excite in practice compared with the other two cases.
其他文献
随着上海轨道交通网络化运营的不断发展,紧急关闭按钮装置作为城市轨道交通车站防护设备重要组成部分,与乘客安全密切相关。对上海既有运营全网络线路运营情况及国家或地方相
为了进一步提高耦合锥结构光纤超声传感器的整体性能,使其更好地服务于光纤超声无损检测,用有限元分析法仿真分析了耦合锥体材料参数对传感器响应灵敏度的影响.以此为依据挑
通过实验研究了不同切割方向Co2+∶MgAl2O4的可饱和吸收特性.测量了[100]和[110]切割方向Co2+∶MgAl2O4的各向异性透过率特性,测量结果表明,[100]和[110]切割晶体的透过率随
针对接触式测量方法易受传感器采集通道限制与附加质量的问题,提出了一种基于三维振动信息融合的卷积神经网络风力机叶片裂纹诊断方法。首先,在双目摄影测量原理的基础上,提出一种三维振动信息融合的多通道样本构造方法,该方法可以集成叶片表面空间分布的多测点运动信息,得到更丰富的信号,且能极大地减少附加质量的干扰。其次,为了获取裂纹多层次的语义信息,提出一种新的多尺度卷积神经网络。选用某型1.5 kW的风力机叶
当前,城市地面交通压力逐渐加大,各个大中型城市正在大力兴建轨道交通系统,自动售检票系统作为轨道交通系统中的一个重要的客流和收益统计专业越来越受到各运营单位的重视.基
会议
透过散射介质成像在很多领域都有重要应用。然而,目前关于针对三维运动物体的透过散射介质成像与追踪的研究却很少。提出一种透过散射层对运动三维物体进行单次曝光录像的方法。从散射层两个不同位置出射的散斑之间非相关且包含了双视角下的物体信息,在这两部分散斑的重叠区域进行探测,可实现三维成像。在曝光过程中绕光轴旋转相机,可探测到由一系列旋转不同角度后的瞬时散斑叠加而成的一张散斑图像。在满足散斑旋转去相关的条件
本文针对位于中心城区的上海外滩隧道工程环境复杂敏感、施工技术难度大、社会关注度高、建设风险极大的特点,提出如下建议: 1.构建由业主统一协调指挥的安全风险管理体系,
会议
由于超材料和超表面的亚波长结构单元的形状和尺寸具有很大的设计自由度,可对电磁波的振幅、相位、波前和方向等进行复杂而精确的调控,同时随着结构参数数量的增加,结构设计
  In this paper, we are concerned with finding multiple zeros of the nonlinear equation f(x) =0 while the multiplicity is unknown explicitly.We present a new
会议
本文以上海轨道交通10号线为背景,对10号线需在虹桥机场不停航的情况下盾构法隧道施工穿越虹桥1、2号航站楼站之间的机场主跑道,海伦路站—邮电新村站区间隧道需穿越四平路上
会议