,Development of a novel autonomous lower extremity exoskeleton robot for walking assistance

来源 :信息与电子工程前沿(英文版) | 被引量 : 0次 | 上传用户:ws1984003
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Today, exoskeletons are widely applied to provide walking assistance for patients with lower limb motor incapacity. Most existing exoskeletons are under-actuated, resulting in a series of problems, e.g., interference and unnatural gait during walking. In this study, we propose a novel intelligent autonomous lower extremity exoskeleton (Auto-LEE), aiming at improving the user experience of wearable walking aids and extending their application range. Unlike traditional exoskeletons, Auto-LEE has 10 degrees of freedom, and all the joints are actuated independently by direct current motors, which allows the robot to maintain balance in aiding walking without extra support. The new exoskeleton is designed and developed with a modular structure concept and multi-modal human-robot interfaces are considered in the control system. To validate the ability of self-balancing bipedal walking, three general algorithms for generating walking pattes are researched, and a preliminary experiment is implemented.
其他文献
锂离子电池和超级电容器作为新型储能器件在日常生活和社会生活中发挥着越来越重要的作用,一直以来都是研究的热点。储能容量和倍率性能的提高一直都是该领域的发展方向。本论
期刊
21世纪是生命科学和健康产业时代,健康产业已成为世界各国最活跃的产业。随着时间的飞逝,健康环保的医用材料在健康产业中的作用越来越重要,并处于持续发展状态。研发无毒安
There is an ocean current in the actual underwater working environment. An improved self-organizing neural network task allocation model of multiple autonomous
期刊
本论文对双辊铸轧Cr17铁素体不锈钢的组织、织构演变及成形性能进行了探索性研究,重点研究了常规生产流程条件下铌、钛双稳定化超纯Cr17铁素体不锈钢的组织、织构演变及成形性
本文从满足医用硬组织替代材料生物活性和稳定性双重要求的角度出发,采用微束等离子喷涂工艺在Ti-6Al-4V基体上制备了羟基磷灰石(HA)涂层,研究影响HA涂层结晶度的工艺参数和
锯材作为建筑和实木家具的主要原材料,随着经济的发展,其需求量也越来越大。结合我国现在木质资源紧缺的实际情况,为了充分合理地利用锯材原料,开发和研究实用的锯材缺陷检测方法
期刊
随着中国经济的快速发展,国内市场对便利店的需求大大增加。但有需求不等于成功,要想把便利店做强,就要认认真真研究它的经营诀窍。便利店相比于一般超市投资回报较高。比如,