论文部分内容阅读
汽车、拖拉机的离合器工作失常时,会影响车辆的动力性及经济性,甚至使车辆无法正常运行。为了给广大驾驶员在使用维修中提供参考,现将离合器使用中常见故障的原因分析及排除方法综述如下: 1.离合器打滑离合器接合时由于主动盘与从动盘之间产生相对滑动,表现出低档起步迟缓,高档起步困难,使发动机动力不能可靠地传递给变速箱。打滑原因与排除方法如下: (1)摩擦片破损应更换新摩擦片。 (2)踏板自由行程过小踏板自由行程过小,可能引起分离杠杆与分离轴承之间的自由间隙消失,分离轴承贴压在分离杠杆端面上,使离合器经常处于半接合状态,工
Vehicles, tractors, clutches work disorders, it will affect the vehicle’s power and economy, and even make the vehicle unable to operate normally. In order to provide reference for the general driver in the maintenance, now the reasons for the common fault in the clutch analysis and troubleshooting are summarized as follows: 1. Clutch slip clutch engagement due to the relative movement between the drive plate and the driven plate, showing Slow start slow, high-grade start-up difficulties, so that engine power can not be reliably transmitted to the gearbox. The reasons for slip and exclusion as follows: (1) Friction plate should be replaced with a new friction plate. (2) pedal free travel is too small pedal free travel is too small, may cause the separation of free clearance between the lever and the separation of the bearing disappears, the release of the bearing pressure on the separation lever end face, so that the clutch is often half-engaged,