论文部分内容阅读
我厂锻压车间有400kg和250kg的空气锤各1台,过去工作缸下套的密封填料通常用2mm厚的石棉橡胶板(红纸柏),但在空气锤的工作过程中,尤其是在夏天,由于缸体温度较高以及润滑油的腐蚀,至使填料破损漏油,工人不能正常操作,不得不停机修理。现在我们采用φ5～φ8mm铜芯细丝旧电线代替石棉橡胶板填料,经过2年时间的使用,没有发生腐蚀漏油。使用铜芯细丝电线的优点是:1.节省机修工时:一般调换石棉橡胶填料要
Forging workshop I plant 400kg and 250kg air hammer each one, in the past under the cylinder seal packing usually 2mm thick asbestos rubber sheet (red paper cypress), but the air hammer work process, especially in the summer , Due to the cylinder temperature is higher and the corrosion of lubricating oil, so that the filler damaged oil spills, workers can not operate normally, had to shut down repair. Now we use φ5 ~ φ8mm copper wire instead of old wires asbestos rubber plate packing, after 2 years of use, there is no corrosion of oil spills. The advantages of using copper wire filament is: 1. Save the mechanic hours: the general exchange asbestos rubber filler to