Numerical investigation on self-priming process of self-priming pump

来源 :排灌机械工程学报 | 被引量 : 0次 | 上传用户:q263742139
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In order to investigate the self-priming process of the self-priming pump,an unsteady simu-lation was conducted where the Navier-Stokes equations were used with the Lagrangian-Eularian mo-del.In course of this investigation,the volume fractions,pressure distribution and self-priming time were carried out.By analyzing the volume,velocity and pressure distribution of the gas-liquid two-phase flow at different time,the two-phase content via the variation law of the two-phase flow in the pump was carried out.By monitoring and analyzing the gas-liquid flow at the outlet of the pump,the self-priming time and crucial periods were given.Two phenomena were mainly characterized by the self-priming process such as the gas-liquid mixing and separation,which occur in the early stage of self-priming process.During that period the gas-liquid mixing clouds appear on the outer edge of the impeller,and the instantaneous void fraction at the inlet and outlet of the impeller decreases obviously. It was also established from the transient study that the gas has a major influence on the hydraulic per-formance of the pump at the early stage of operation.To increase the usage of self-priming pump and to also understand the energy conversion of the pump,it is very essential to investigate and establish the basic working principle of the self-priming pump.
其他文献
  本文采用纳米二氧化硅为增韧剂,利用固相剪切碾磨技术制备聚甲醛/纳米二氧化硅复合材料,研究了偶联剂种类、碾磨次数和纳米Si02添加量对POM/纳米Si0:复合材料力学性能的影响
周志斌,汉族,1960年6月生,元氏县人,工程师。石家庄市政协委员,河北元隆化工有限公司董事长、总经理,元氏县安全生产管理协会副会长、理事长,元氏县慈善会会员,河北省氮肥工
  本文以具有良好生物相容性的热塑性聚氨酯为增韧剂,通过熔融加工过程中分别引入过氧化二异丙苯(DCP)和改性碳纳米管(CNTs),以期获得韧性和结晶行为均有明显改善的新型PLLA
  本文首次以PVAc为基体,通过熔融混合的方式与有机小分子受阻酚进行杂化复合,研究杂化作用对PVAc阻尼性能的影响,且续合DSC和红外等表征手段分析影响性能的原因。结果,通过红
成龙国际影视巨星,北京2008奥运会申奥形象大使,北京2008奥运会火炬手2008年5月4日,当奥运圣火从中国澳门特区进入海南省三亚市时,全球观众都能看到“功夫之王”成龙手持火炬
  本文通过原位自由基聚合方法接枝改性MWNTs和VGCFs,比较不同物质接枝效果和接枝产物的分散稳定性,为复合材料的制备提供一定的依据。实验结果显示改性后MWNTs和VGCFs在特定
  本研究首次采用MgC12-6H20与甘油复配增塑改性PVA,实现了PVA的熔融挤出过程。经图像分析,加入复配增塑剂增塑改性可使得PVA的Tm明显降低,热稳定性和熔体流动性显著提高,拓宽P
  本文采用负载方法将β-成核剂包覆在硅灰石表面,用于填充PP,研究了制备的硅灰石填充PP复合材料中的β-成核作用及其热稳定性。结果表明,硅灰石和改性硅灰石对PP结晶具有异相
  本文针对PLA电纺纤维的结晶度低的特点,系统比较了60℃和120℃热处理24小时以后的样品和常温干燥的样品在形貌、结晶性能和力学性能等方面的差别。结果,热处理以后的纤维膜
  本研究采用熔融复合的方法,把CNTs填充到多种PC基共混物中制成导电材料,以期拓展PC基共混物的应用范围。经研究发现,当ABS的含胶量较低时,其行为和其基体相SAN类似,CNTs分布在