论文部分内容阅读
灭菌关料筒填充完毕,立即灭菌。料简体积大,采用高压灭菌,数量有限,还易发生“胀筒”弊病,大生产时,多采用常压灭菌。夏季气温高,应清晨配料,随之集中劳力填料,填毕即灭菌,不可拖延至午后,以减少灭菌前微生物自繁生物量。料筒入锅后,呈“井”字型排列,堆高5—6层后,放置活动层栅。再继续堆垛。不少初学者,一味追求堆放筒数,结果下层料筒受上层料筒重力压迫,变形,堵塞蒸气通道,受热不均,至少得花5—6小
Sterilization off the cartridge filling is completed, immediately sterilized. Large volume of materials used, using high-pressure sterilization, a limited number, but also prone to “bulging” defects, large-scale production, the use of multi-pressure sterilization. High summer temperatures, ingredients should be early in the morning, followed by intensive labor stuffing, fill at the completion of sterilization, can not be delayed until noon, in order to reduce the microbial biomass since pre-sterilization. After the cartridge into the pot, was “well” font arrangement, heap 5-6 layers, placed activity grid. Continue stacking again. Many beginners, blindly pursue the pile number, the results of the lower barrel by the upper barrel gravity pressure, deformation, block the steam channel, uneven heating, at least 5-6 small