论文部分内容阅读
D0 2 2型轴承内沟测量仪是轴承制造厂大量使用的常用仪器 ,仪器的底座由铸件制成 ,带槽的铸铁板及铰链固定在底架上 ,所有部件均装置在铸件板的槽中 ,并能做前后调整 ,平板上部带平支点的杠杆在弹簧的作用下与沟道紧靠 ,并将轴承内圈始终压在支点1、2上 ,如图 1所示。装配分选
D0 2 2 type bearing inner groove measuring instrument is widely used in bearing manufacturers commonly used instruments, the base of the instrument made of castings, slotted cast iron plate and hinged on the chassis, all components are installed in the casting plate groove , And can be adjusted before and after, flat plate with flat fulcrum lever in the spring under the action of the channel close, and the bearing inner ring is always pressed on the fulcrum 1, 2, as shown in Figure 1. Assembly and sorting