【摘 要】
：
Loss of drilling fluids in large porous and fractured zones inevitably up-regulates the overall cost of drilling.As a type of acid-soluble cement,magnesium oxysulfate(MOS)cement is arousing huge attention for the less hygroscopic nature and less damaging
【机 构】
：
State Key Laboratory of Petroleum Resources and Prospecting,MOE Key Laboratory of Petroleum Engineer
论文部分内容阅读
Loss of drilling fluids in large porous and fractured zones inevitably up-regulates the overall cost of drilling.As a type of acid-soluble cement,magnesium oxysulfate(MOS)cement is arousing huge attention for the less hygroscopic nature and less damaging to steel casings compared with magnesium oxychloride(MOC)cement.The present study developed MOS cement as a fast setting,high strength and acid-soluble lost circulation material to reduce the problem of losses.As suggested in this study,a higher strength of MOS cement at 70℃could be achieved by elevating MgO/MgSO4·7H2O molar ratio or down-regulating H2O/MgSO4·7H2O molar ratio.Boric acid and borax could act as effective retarders.Plugging slurry based on MOS cement could effectively block the simulated porous loss zones exhibiting a diameter from 1.24 mm to 1.55 mm,as well as the fractured loss zones with a width from 2 mm to 5 mm and bearing a pressure difference up to 8 MPa.Permeability recovery test demonstrated that it facilitated future oil and gas production.The successful field application in the Junggar Basin,Xinjiang,China verified the significant plugging effect of MOS cement for severe loss problems.
其他文献
The interfacial properties and rheological behavior of surfactant/polymer complex systems were measured to investigate the association behavior of the associating polymer.Compared with the pure surfactant solution,there are two inflection points in the su
Practice has proved that drag reduction oscillators can decrease the axial friction and increase wellbore extension effectively in sliding drilling operations.However,the complicated mechanical behavior of drillstring with drag reduction oscillators has n
In oil and gas well drilling operations,it is of great significance to accurately predict the drag coefficient and settling velocity of drill cuttings in non-Newtonian drilling fluids.In this paper,the free-falling of 172 groups of spheres and 522 groups
Accurate estimation of fracture density and orientation is of great significance for seismic character-ization of fractured reservoirs.Here,we propose a novel methodology to estimate fracture density and orientation from azimuthal elastic impedance (AEI)
This paper presents an innovative data-integration that uses an iterative-learning method,a deep neural network(DNN)coupled with a stacked autoencoder(SAE)to solve issues encountered with many-objective history matching.The proposed method consists of a D
Organic rich laminated shale is one type of favorable reservoirs for exploration and development of continental shale oil in China.However,with limited geological data,it is difficult to predict the spatial distribution of laminated shale with great verti
A 3-dimensional finite element model was built to determine the effect of inclination angle of a corrosion defect on local mechano-electrochemical(M-E)effect in a simulated soil solution.Because of the high effect of the defect inclination angle on the M-
The attenuation of CO2 injectivity has become the biggest technical barrier for the application of CO2 enhanced coalbed methane recovery(CO2-ECBM).Commonly,the intermittent CO2 injection,N2 dis-placing CO2 and pre-fracturing are the potential CO2 enhanced
In deepwater drilling,the properties of water-based drilling fluids change remarkably due to low tem-perature and high pressure,which have a significant effect on lost circulation,wellbore instability and the window between pore pressure and fracturing pr
This work presents the design of a robust foam formulation that tolerates harsh reservoir conditions(high salinity,high divalent ion concentration,high temperature,light oil,and hydrocarbon injection gas)in a sandstone reservoir.For this,we selected anion