【摘 要】
：
The normal compression tests on intact samples and artificial joints with different saw-tooth shape under cyclic loading and half-sine waves of different freque
【机 构】
：
School of Resources and Safety Engineering
【基金项目】
：
supported by the National Natural Science Foundation of China;国家重点基础研究发展规划(973计划)
论文部分内容阅读
The normal compression tests on intact samples and artificial joints with different saw-tooth shape under cyclic loading and half-sine waves of different frequencies were performed by using Instron1342 servo-controlled material testing machine. The specimens were made artificially with mortar. The loading frequency ranged from 0.005 Hz to 0.1 Hz. The experimental results show that joint closure curves are non-linear and concave up. The stress-deformation curves under cyclic loading exhibit hysteresis and permanent set that diminish rapidly and keep constant finally on successive cycles. Normal displacement successively decreases from the joint J1 to J2, to J3 under the same normal loads regardless of frequency. Considering the loading frequency effect, normal displacement of joint J1 decreases with increasing the loading frequency except that the loading frequency is 0.05 Hz. Normal displacement of joint J2 increases with increasing the loading frequency. Normal displacement of joint J3 increases with increasing the loading frequency when the frequency ranges from 0.005 Hz to 0.05 Hz. Its normal displacement, however, becomes least when the loading frequency is 0.1 Hz.
其他文献
A new cyclometalated platinum complex containing 2, 5-bis(naphthalene-1-y1)-1,3,4-oxadiazole ligand was synthesized and characterized. The UV-Vis absorptions an
The minority carrier diffusion length of n-type GaN films grown by metalorganic chemical vapor deposition (MOCVD) has been studied by measuring the surface phot
目的 回顾性分析重型再生障碍性贫血(severe aplastic anemia,SAA)行脐带间充质干细胞(umbilical cord mesenchymal stem cells,UC-MSCs)联合单倍体异基因造血干细胞移植(hap
The influence of cryogenic treatment on the mechanical properties of the extruded Mg-Gd-Y-Zr(Mn) alloys was investigated by the tensile tests, scanning electron
The surface of an up-conversion luminescence material was modified by overcoating with SiO2, which was synthesized from a hydrolysis progress of tetraethoxysila
A new algorithm is proposed, which immolates the optimality of control policies potentially to obtain the robusticity of solutions. The robusticity of solutions
The weighted arithmetical mean complex judgement matrix(WAMCJM)is the most common method for aggregating group opinions,but it has a shortcoming,namely the WAMC
新疆属于干旱、半干旱地区,地域广大,经济发展水平较低,资料积累较少,在当前实现跨越式发展的背景下,小区域环境容量的计算方法选用在环境保护工作中尤显重要,需进行科学探讨
Abundant test data are required in assessment of weapon performance.When weapon test data are insufficient,Bayesian analyses in small sample circumstance should
To describe the real world which is a harmonious unification world with both determinism and randomness, we propose a harmonious unifying hybrid preferential mo