Centralized light-wave WDM-PON employing DQPSK downstream and OOK remodulated upstream signals

来源 :The Journal of China Universities of Posts and Telecommunica | 被引量 : 0次 | 上传用户:dtc6493829
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A novel architecture for wavelength-division-multiplexing passive optical network (WDM-PON) with centralized light-wave is proposed and demonstrated. At the optical line terminal (OLT) session of this architecture,optical differential quadrature phase shift keying (DQPSK) modulated signal with constant-intensity at 10 Gbit/s is utilized for downstream transmission. At the optical network unit (ONU),part of the downstream optical power is remodulated with on-off keying (OOK) intensity modulation at 10 Gbit/s for upstream without additional laser. Simulation results show that the power penalties of the downstream for 20 km single-mode fiber (SMF) transmission and multi-channels are negligible. While for the upstream,the power penalties are obvious. The simulation results and analysis also reflect that by reducing the launch power of DQPSK transmitters,power penalties can be reduced,although the transmission distance is limited. A novel architecture for wavelength-division-multiplexing passive optical networks (WDM-PON) with centralized light-wave is proposed and demonstrated. At the optical line terminal (OLT) session of this architecture, optical differential quadrature phase shift keying (DQPSK) modulated signal with constant-intensity at 10 Gbit / s is utilized for downstream transmission. At the optical network unit (ONU), part of the downstream optical power is remodulated with on-off keying (OOK) intensity modulation at 10 Gbit / s for upstream without additional laser. Simulation results show that the power penalties of the downstream for 20 km single-mode fiber (SMF) transmission and multi-channels are negligible. While for the upstream, the power penalties are obvious. The simulation results and analysis also reflect that by reducing the launch power of DQPSK transmitters, power penalties can be reduced, although the transmission distance is limited.
其他文献
大庆是六十年代依靠石油资源开发而形成的资源型城市。经过37年的开发,特别是连续21年的高产稳产,目前已进入高含水后期开采阶段。在石油贮量日趋减少,开采成本逐渐加大的情
随着中国经济整体稳定持续健康发展,中国塑料工业经过"十五"实现了跨越式的发展,塑料制品业取得了令世人瞩目的成就,实现了主要经济指标两位数大幅度增长,总产值位居轻工行业
随着中国经济整体稳定持续健康发展,中国的塑料机械产销量自2005年起已跃居世界第一。而塑料制品消耗量也排在世界第二位,可以说中国是塑料机械和塑料制品的消费大国,从近几
橡胶机械是专业性非常强的产业机械,其兴旺发达几乎完全决定于橡胶制品工业的需求。最近5年来,随着世界橡胶产业特别是轮胎工业的快速发展,全球橡机生产销售出现了多年少见的
轮胎硫化机是轮胎工业生产中最为重要的工艺设备之一,种类多,数量大,大约占到轮胎企业设备投资总额的1/4以上。轮胎是一种热压模制品,其产品外观质量和生产效率几乎全是由硫
通过对未来露天采矿所使用的大型矿用汽车的供给和使用情况,对巨型工程轮胎需求进行预测之后,对全球巨型轮胎供给的供给进行分析,得出到2010年市场的需求仍然大于供给。面对
橡胶制品的生产可以通过多种方法来实现,如:模压法、传递法、压注法和注射法。通过实践表明在这些方法中,注射成型方法具有更多更明显的优点。我国国民经济处于快速发展时期,
能源的重复利用,将生产成本降到最低,同时减少热源对环保的污染,做到真正意义的清洁生产,是当今世界广泛关注和研究的课题,也是当今世界最流行的做法。目前很多轮胎生产厂在
会议
目前,挤出设备制造厂面临的挑战正在发生着不断的变化。从过去的几年中看到:开发出复合挤出机。自从RMS公司在1981年为轮胎胎面的生产提供了第一台四复合挤出机之后,该机已成
近年来随着我国橡胶制品业的迅猛发展,橡胶片材在各行各业中的应用愈来愈广泛。在建筑行业、在石油化工、印染、选矿设备,以及运输带盖胶和工业用的宽幅胶板,轮胎行业的气密
会议