论文部分内容阅读
我们设计成功一种角度砂轮修正器,可以修正平面磨床上的砂轮,用来加工V形铁或有斜面的零件,角度偏差只在5＇左右。修正器的结构很简单。定位块7,由螺栓固紧在工作台侧面,使底座1横向定位。3个标准柱塞4按90°排列,中间的柱塞可以在底座内拔出。回转板2的端部有固定圆销G,直径同柱塞4相同。回转板2调整到所需要尺寸后,由螺栓5、螺帽8拧紧在底座上。螺栓5可以在底座弧形槽内滑动。轴3到圆销G的半径,同它
We have successfully designed an angle grinder corrector that corrects the grinder on a surface grinder to process V-shaped iron or bevelled parts with an angular deviation of only about 5 ’. The structure of the corrector is very simple. Positioning block 7, bolted to the side of the table, so that the base 1 is positioned laterally. 3 standard plunger 4 arranged in 90 °, the middle of the plunger can be pulled out of the base. The end of the rotary plate 2 has a fixed pin G, the same diameter plunger 4. After the rotary plate 2 is adjusted to the required size, the bolt 5 and the nut 8 are tightened on the base. The bolt 5 can slide in the arc groove of the base. The radius of shaft 3 to pin G is the same as it